Name: Bark River PSK Elmax Green Canvas Micarta
Brand: Bark River Knives
SKU: BRK06-041GNC
Availability: OutOfStock

Handle/blade: micarta/elmax
Blade length: 5.7 cm
Weight: 60 grams

The **Bark River PSK**

 is a practical fixed EDC knife. The PSK is namely one of the smallest Bark River knives on the market. Because of the compact and small size the PSK can easily be carried in your pocket or around your neck as a neck knife. However, don't let its size mislead you. The edge is incredibly sharp and with the finger groove you have a lot of grip over the knife. Bark River definitely called the PSK, personal survival knife for a reason. This knife is namely made to always carry with you. As such you will always have a knife at the ready during unexpected emergencies. Incredibly practical!  
   
 

The blade is made from Böhler Elmax steel. An incredibly stainless type of steel that retains its sharpness well. A type of ultimate combination of the wear resistance of carbon with the corrosion resistance of stainless steel. The edge has been enhanced with a convex grind which you can maintain by stropping it.

 The handle is made from canvas micarta. A strong and light-weight material, made from linen and synthetic resin. Feels comfortable in hand, even in wet or cold circumstances.

 The Bark River Bravo PSK comes with a leather belt sheath (max. belt width 5.0 cm). The sheath is designed as such that you can also comfortably carry it in your pocket.

 Bark River makes all of its knives almost completely by hand. As such each knife is unique. Especially when you are working with natural materials a knife can differ from the photographs. The knife you receive can therefore be subtly different from the product photos. The model and type of material, however, will always be the same.



Bark River PSK Elmax Green Canvas Micarta

brand

colour

zm_series

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

notforsale

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Bark River PSK Elmax Green Canvas Micarta