Name: Benchmade 101BK Follow Up neck knife
Brand: Benchmade
SKU: BE101BK
Price: 113.25 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust Elite Knife Sharpener WSBCHPAJ-PRO-ELT, sharpening system

notforsale

productlabel

not_replaced_in

Benchmade Mini SOCP 177BK fixed knife, Greg Thompson design

legal_agecheck_key

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper paddle strop Viking, rough, stropping paddle

Spyderco Sharpmaker, 204MF

Blade-Tech Thigh Rig, leg attachment for sheaths and holsters

Benchmade Mini SOCP 173BK fixed knife, Greg Thompson design

Knives and Tools Knife Cleaning Mat, rubber

Benchmade 179GRY SOCP Rescue Cutter

Benchmade Worksharp BE50082 Guided Hone Tool, 14 degrees

Benchmade Worksharp BE50080 Guided Hone Tool, 20 degrees

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

UltiClip XL clip for sheaths

Blade-Tech Tek-Lok (large) universal belt loop mounting system

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

UltiClip UltiLink Complete Kit, mounting set for sheaths

Knivesandtools #MatchPatch, #01 OG-Green, patch

Handle/blade: paracord/S30V
Blade length: 6.6 cm
Weight: 55 grams


The **Benchmade 101BK Follow UP** is a light-weight fixed knife. You can attach it to MOLLE webbing, but it will also come in handy as a neck knife.



Unique about the Benchmade Follow Up is the way the handle is constructed. It is namely enhanced with a couple cut-outs. As such creating a paracord wrap will become a piece of cake. Benchmade added a starting point through which you can pull the included piece of 550 paracord. The end is molten together. As such this piece is stopped by the clamp in the handle. All you do now is wrap the cord around the handle. You use the two remaining clamps at the end of the handle to secure the paracord.




Benchmade 101BK Follow Up neck knife

brand

colour

zm_series

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade 101BK Follow Up neck knife

Benchmade 101BK Follow Up neck knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 101BK Follow Up neck knife

Benchmade 101BK Follow Up neck knife

Benchmade 101BK Follow Up neck knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 101BK Follow Up neck knife

Relevant topics