Name: Benchmade Altitude 15200ORG Orange fixed knife
Brand: Benchmade
SKU: BE15200ORG
Availability: OutOfStock

Handle/blade: carbon fibre/S90V
Blade length: 7.6 cm
Weight: 47 grams


The **Benchmade Altitude** is an incredibly light fixed knife made from amazing materials. Benchmade has added the Altitude to the *Hunting* collection. Nevertheless, the name probably already suggests were the inspiration came from: mountaineering. After all, with a weight of only 47 grams (70 grams with sheath) it is a very light-weight option.


If you are looking to save some weight you definitely don’t want to bring sharpening stones to join you on your adventure. For this reason Benchmade has chosen a wonderful type of steel for this pocket knife: CPM S90V. This is a stainless type of steel that retains its sharpness really well. As such you rarely have to sharpen the knife which is great when you are on the road. However, leaving it out and close to salt or fruit acids could create some spots over time. For this reason Benchmade has enhanced the altitude with a bright-orange DLC coating to also make sure you won’t lose it that easily. DLC stands for Diamond Like Coating. An incredibly hard coating that is also very sustainable.


Because the thin handle doesn’t provide much grip Benchmade has enhanced it with a small block of carbon fibre. It doesn’t seem much, but once you start using it you will notice the enormous effect the little block has on the ergonomics of the knife. In addition, the handle takes care of enough grip for the kydex sheath.



Benchmade Altitude 15200ORG Orange fixed knife

colour

Benchmade Altitude 15201OR, CPM-S90V, Carbon Fiber, hunting knife

handedness

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

brand

zm_series

sharpening_angle

notforsale

not_replaced_in

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade Altitude 15200ORG Orange fixed knife