Name: Böker Plus Pelican 01BO729 pocket knife, Brad Zinker design
Brand: Böker
SKU: BO01BO729
Price: 89.95 EUR
Availability: OutOfStock

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Böker Plus Hermod 2.0 02BO053 outdoor knife, Midgards design

legal_agecheck_key

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Böker Plus K.I.D. Cal .50, 09BO072 Black, tactical pen

Böker Plus CID cal .45 Gray 09BO086 tactical pen

Böker Plus CID cal .45 Black 09BO085 tactical pen

Knives and Tools Knife Cleaning Mat, rubber

Böker Plus Mikri 02BO088, fixed knife, Kornel Kiss design

Skerper Maintenance Oil Pen MA002, 10 ml

Böker Hamburger Pouch 90086, EDC-pouch

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Böker Pure Camellia oil 04BO175, 100ml

Boker Plus Tool kit Torx

Böker Plus Trucker Cap 09BP0009

Boker Plus Tool kit Hex key

Knivesandtools Knife Patch, Padraig Croke design

Handle/blade: titanium/VG10
Blade length: 4.9 cm
Weight: 30 grams


The **Böker Plus Pelican** is a compact and light-weight pocket knife, designed by Brad Zinker. You immediately recognize his vision in this design. The holes in the handle are typical for his work. The blade of the Pelican is made from VG10. You can easily open it with one hand by using the thumb hole. When opened the framelock blocks the blade. In terms of finish Zinker has chosen a coarse stonewash. Both the frame and the blade have a stonewashed finish. Because of this finish traces of use barely stand out. The shape of the blade is a so-called Tanto. Optimized for drilling and therefore perfect for opening packages.



Böker Plus Pelican 01BO729 pocket knife, Brad Zinker design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Plus Pelican 01BO729 pocket knife, Brad Zinker design

Böker Plus Pelican 01BO729 pocket knife, Brad Zinker design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus Pelican 01BO729 pocket knife, Brad Zinker design

Böker Plus Pelican 01BO729 pocket knife, Brad Zinker design

Böker Plus Pelican 01BO729 pocket knife, Brad Zinker design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus Pelican 01BO729 pocket knife, Brad Zinker design

Relevant topics