Chris Reeve Pacific Black PAC-1000 survival knife, non serrated

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Handle/blade: micarta/CPM S35VN
Blade length: 16.0 cm
Weight: 325 grams

The **Chris Reeve Pacific** is a large survival knife, designed by Chris Reeve and Bill Harsey. These giants in the knife industry developed the Pacific as the civil version of the knife that was made to celebrate the 50th anniversary of the First Special Forces (Airborne). One of the places where these forces provided their services was the Pacific, hence the name.

 The royal blade of the Pacific is made from CPM S35VN steel. A stainless type of powder steel that was developed by Chris Reeve and Crucible. The hollow grind is nicely applied and because a large part of the blade is still very thick it is incredibly solid. It is also important that the steel of the blade runs throughout the handle: full tang. To prevent rust and reflections the blade is enhanced with a KG GunKote coating.

 The handle is made from micarta. This is an incredibly strong and light-weight material perfect for handles. It feels great in hand and it offers a lot of grip. Even if micarta gets wet it still offers you enough grip. The textile fibres in the material expand a little to make sure you have more grip. Because of the size of the handle you even have enough grip with large hands. The Pacific can also easily be used while wearing gloves.

 The Chris Reeve Pacific comes with a good nylon sheath. It is enhanced with a plastic insert and is MOLLE-compatible. You immediately notice that even the sheath was well thought out: The inside of the plastic insert has been enhanced with a layer of fabric to make sure the knife won't move inside the sheath.



 Chris Reeve Pacific Flat Dark Earth PAC-1004 survival knife, plain edge

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Chris Reeve Pacific Flat Dark Earth PAC-1004 survival knife, plain edge

Chris Reeve Pacific Flat Dark Earth PAC-1004 survival knife, plain edge

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Chris Reeve Pacific Flat Dark Earth PAC-1004 survival knife, plain edge

Chris Reeve Pacific Flat Dark Earth PAC-1004 survival knife, plain edge

Chris Reeve Pacific Flat Dark Earth PAC-1004 survival knife, plain edge

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Chris Reeve Pacific Flat Dark Earth PAC-1004 survival knife, plain edge

Relevant topics