Name: CRKT Keramin, Green Black, 2389 neck knife, Alan Folts design
Brand: CRKT
SKU: CK-2389
Price: 44.99 EUR
Availability: InStock

Knivesandtools #EveryDayCloth, micro-fibre cloth

notforsale

not_replaced_in

Skerper Pocket Strop STP002, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 ml

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

CRKT Iota Black 9085K, Tom Stokes design

legal_agecheck_key

CRKT Knife Maintenance Tool 9704, Tom Stokes design

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

CRKT Squid pocket knife stonewash-2490

CRKT Hex Bit Driver, Brass, 9911-2, Scout Tools design

Work Sharp Guided Field Sharpener, WSGFS221

CRKT 9110C, Eat'N Tool XL, bead blast

Fallkniven Diamond Ceramic Whetstone DC4

CRKT 9100KC, Eat'N Tool, Black

The **CRKT Keramin 2389** is an extremely ergonomic neck knife, designed by Alan Folts. When you look at the Keramin you'll immediately notice the handle. The finger grooves provide a comfortable three-finger grip. Your little finger rests on the lanyard to make sure you can control the Keramin with your entire hand. There is *jimping* for your thumb on the spine of the blade. These are small grip serrations that give you more control. 

The 5cr15MoV-steel blade has a hollow grind, so the Keramin cuts beautifully. The blade is not that long, but thanks to the excellent ergonomics, it can be used in many ways, from opening boxes to light outdoor tasks. It's a great neck knife to carry with you on a daily basis.

You can easily take the knife with you in the included plastic sheath. You can use a neck cord to hang it around your neck, or use the included belt clip to hang it from your belt.

CRKT Keramin, Green Black, 2389 neck knife, Alan Folts design

brand

colour

handedness

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT Keramin, Green Black, 2389 neck knife, Alan Folts design

CRKT Keramin, Green Black, 2389 neck knife, Alan Folts design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

CRKT Keramin, Green Black, 2389 neck knife, Alan Folts design

CRKT Keramin, Green Black, 2389 neck knife, Alan Folts design

CRKT Keramin, Green Black, 2389 neck knife, Alan Folts design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

CRKT Keramin, Green Black, 2389 neck knife, Alan Folts design

Relevant topics