Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Pocket Strop STP002, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 ml

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Shapton Glass Stone Seven sharpening set, 70708

 KME Precision Knife Sharpening System, R.P.S.H. Combo Kit, KF-CBO

Fox Bean Gen 2 Full Black BF-719G10 Black Fox pocket knife, Serge Panchenko design

legal_agecheck_key

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Fox Knives Racli BF-744ZW Black Fox, Zebra wood pocket knife, Simonutti design

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Lansky Pocket Ceramic Sharpening System

Fenix E28R rechargeable EDC flashlight

Nano-Oil 10w maintenance oil 8cc/8ml

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Handle/blade: G10/Böhler N690Co
Blade length: 9.6 cm
Weight: 240 grams

The **Fox Knives Specwog Alpha FX-310** is a large, robust pocket knife, designed by Dean Rostohar. He designed the Specwog as an all-round military knife. It's versatile and sturdy enough to perform a wide variety of tasks with flying colours.



The blade of the Specwog immediately catches the eye. Its edge is very similar to a tracker design. The 'hollow' edge is excellent at cutting through rope and the like. This curvature also makes it perfect for pulling wood shavings. You use the front part of the blade for all normal tasks.



Fox has opted for strong, proven materials. The blade is made from Böhler N690Co steel, which is very corrosion-resistant and tough, and requires little maintenance. The handle is made from G10. This material is seriously strong, especially when you consider its relatively low weight.



To prevent the blade from closing during use, Fox has equipped it with a super strong back lock. It is made even stronger by the fact that there is a secondary lock that blocks the back lock in both the open and closed position. Double the security means double the safety.




Fox Specwog Alpha FX-310 FKMD pocket knife, Dean Rostohar design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Robuust, solide, no nonsense mes. Sterke pommel voor zelfverdediging. Speerpunt en curve Karambit. Geribbelde bovengrip. In de folderversie als dagelijks draagmes. In de vaste versie als militair gevechtsmes. Prijs is in verhouding met de kwaliteit van het mes.

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Fox Specwog Alpha FX-310 FKMD pocket knife, Dean Rostohar design

Fox Specwog Alpha FX-310 FKMD pocket knife, Dean Rostohar design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Fox Specwog Alpha FX-310 FKMD pocket knife, Dean Rostohar design

Fox Specwog Alpha FX-310 FKMD pocket knife, Dean Rostohar design

Fox Specwog Alpha FX-310 FKMD pocket knife, Dean Rostohar design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Fox Specwog Alpha FX-310 FKMD pocket knife, Dean Rostohar design

Relevant topics