Name: LT Wright JX3, A2, Matte Natural Micarta, Leather sheath, EDC-knife, Chris Tanner design
Brand: LT Wright
SKU: LT-JX3-NM-LS
Price: 218.75 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

productlabel

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Skerper Beeswax MA001, 250 gram

Fallkniven Diamond Ceramic Whetstone DC4

Ballistol maintenance oil, 50 ml

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools #EveryDayCloth, micro-fibre cloth

Ballistol maintenance oil spray, 200 ml

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Handle/blade: micarta/A2
Blade length: 7.6 cm 
Weight: 90 grams

The **LT Wright JX3** is a remarkable EDC knife, designed by Chris Tanner. He is known from the YouTube channel 'Preparedmind101'. He designed the JX3 in cooperation with Peter Kohler from Dark Timber Knives as a knife to carry with you on a daily basis, for many different tasks. From opening boxes to preparing food or even outdoor cooking when you go camping.



The extra attention paid to the construction of this knife has truly paid off. The handle is attached with strong pins for a mechanical construction. LT Wright combined it with naval grade epoxy. As such the construction is even more solid. Ready to be used!



## A2 steel blade


A2 is a tough type of strong tool steel that retains its sharpness well. An advantage of A2 is that it is easy to sharpen. Even when you are out in the field with limited means. Do, however, be careful with rust: A2 is not completely stainless. Pay close attention when working with moisture, salt and acids. This could change the colour of the blade or establish a *patina*. So clean it after use and occasionally add a couple drops of oil.



 The comfortable handle is made from micarta. A strong and light-weight material, made from linen and synthetic resin. Feels comfortable in hand, even in wet or cold circumstances.



This knife comes with a top-quality leather sheath.



## About LT Wright Knives


LT Wright Knives is an American outdoor brand. At LT Wright Knives they still largely work in an old-fashioned way. By hand 'grinds' or 'bevels' are added to the blades, the handles are glued together and shaped, and even the entire knife is finished by hand. This means that there can be subtle differences between the different versions of the same knife. Both in terms of finish and size. This is also the charm of LT Wright Handcrafted Knives: each knife is unique. It also means that sometimes it is difficult to keep all knives in stock. But the models that are labelled as 'in stock' on our website, are in stock and can immediately be delivered.




LT Wright JX3, A2, Matte Natural Micarta, Leather sheath, EDC-knife, Chris Tanner design

brand

colour

zm_series

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

videos

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

LT Wright JX3, A2, Matte Natural Micarta, Leather sheath, EDC-knife, Chris Tanner design

LT Wright JX3, A2, Matte Natural Micarta, Leather sheath, EDC-knife, Chris Tanner design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

LT Wright JX3, A2, Matte Natural Micarta, Leather sheath, EDC-knife, Chris Tanner design

LT Wright JX3, A2, Matte Natural Micarta, Leather sheath, EDC-knife, Chris Tanner design

LT Wright JX3, A2, Matte Natural Micarta, Leather sheath, EDC-knife, Chris Tanner design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

LT Wright JX3, A2, Matte Natural Micarta, Leather sheath, EDC-knife, Chris Tanner design

Relevant topics