Name: TOPS Knives Quickie QCK-01 karambit
Brand: TOPS Knives
SKU: TK-QCK-01
Price: 147.45 EUR
Availability: OutOfStock

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Blade-Tech Thigh Rig, leg attachment for sheaths and holsters

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper paddle strop Viking, rough, stropping paddle

Spyderco Sharpmaker, 204MF

productlabel

Knives and Tools Knife Cleaning Mat, rubber

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

TOPS Knives HAT-01 7-Panel Trucker cap

UltiClip XL clip for sheaths

Blade-Tech Tek-Lok (large) universal belt loop mounting system

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

UltiClip UltiLink Complete Kit, mounting set for sheaths

Knivesandtools #MatchPatch, #01 OG-Green, patch

Knivesandtools #MatchPatch, #02 Burnt Orange, Limited Edition, patch

TOPS Knives HAT-03 Trucker cap

Fallkniven Diamond Ceramic Whetstone DC4

Handle/blade: 1095 carbon steel
Blade length: 3.5 cm
Weight: 35 grams

The **TOPS Knives Quickie QCK-01** is a remarkable, fixed knife. TOPS designed this knife for police officers in the United States as a practical tool alongside their service weapon. It might not always be used for this purpose, but it is still a practical knife for any knife enthusiast.

 The Quickie is a so-called '3rd finger karambit'. This means that you don't put your index or little finger in the thumb hole, but your middle or ring finger. As such you will have your hands relatively free to carry out other tasks while you are still holding the knife.

 The Quickie is made from 1095 carbon steel. A tough type of steel that is easy to sharpen. The only thing you need to pay attention to is that 1095 isn't stainless. So being careful with moisture, acids and salt is therefore recommended, just like a drop of oil for protection. The blade is enhanced with two cutting sides.

 The TOPS Quickie comes with a compact kydex sheath. With it you can carry it high on your belt to make sure you will always have it close.



TOPS Knives Quickie QCK-01 karambit

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

TOPS Knives Quickie QCK-01 karambit

TOPS Knives Quickie QCK-01 karambit

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

TOPS Knives Quickie QCK-01 karambit

TOPS Knives Quickie QCK-01 karambit

TOPS Knives Quickie QCK-01 karambit

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

TOPS Knives Quickie QCK-01 karambit

Relevant topics