Name: TRC Knives South Pole Apocalypse Finish 2020 Biohazard Edition, Elmax, Natural Canvas Micarta, survival knife
Brand: TRC Knives
SKU: TI-SP-BCM-2020
Price: 299.95 EUR
Availability: OutOfStock

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Skerper Pocket Strop STP002, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Work Sharp Angle Set knife sharpener, WSBCHAGS

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Fallkniven Diamond Ceramic Whetstone DC4

TSPROF Blitz Complete sharpening system

Lansky Masters Edge Sharpener, MEDGE1

Handle/blade: micarta/Elmax
Blade length: 11.5 cm 
Weight: 190 grams

The **TRC Knives South Pole Apocalypse Finish 2020 Biohazard Edition** is a robust and large survival knife, made in Lithuania. The source of inspiration for the South Pole was Roals Amundsen. This Norwegian explorer was the first man to ever reach the South Pole. He was known for his excellent preparation with which he could handle all possible situations. With the TRC South Pole you will be just as prepared!



This is the special Biohazard edition. Only a limited amount of this knife was produced. Available while stocks last.



The TRC Knives South Pole has a blade made from Böhler Elmax steel. A strong type of steel that is corrosion resistant and retains its sharpness for a long time. The flat grind is applied by hand in the TRC workshop. This rarely happens with production knives. With a 4.4 mm blade thickness you will always have enough strength in hands for survival tasks. At the same time the edge is nice and thin to make sure the knife cuts properly.



The handle is made from micarta. It might be hard to see on the photograph, but the surface has been enhanced with a subtle diamond pattern. As a result you will have even more grip over the knife. Because the curved tang of the blade protrudes from the handle it will feel even better in hand.



The TRC Knives South Pole comes with a stunning kydex sheath. It beautifully fits around the knife, you can definitely tell that a lot of attention was paid to it. The sheath is enhanced with a flexible belt loop with can also be converted for left-handed use. Of course you can also select your own mounting method and screw this to the mounting holes. Please note: kydex almost always leaves behind small scratches on the blade as it slides in and out of the sheath. This is normal.




TRC Knives South Pole Apocalypse Finish 2020 Biohazard Edition, Elmax, Natural Canvas Micarta, survival knife

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

TRC Knives South Pole Apocalypse Finish 2020 Biohazard Edition, Elmax, Natural Canvas Micarta, survival knife

TRC Knives South Pole Apocalypse Finish 2020 Biohazard Edition, Elmax, Natural Canvas Micarta, survival knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

TRC Knives South Pole Apocalypse Finish 2020 Biohazard Edition, Elmax, Natural Canvas Micarta, survival knife

TRC Knives South Pole Apocalypse Finish 2020 Biohazard Edition, Elmax, Natural Canvas Micarta, survival knife

TRC Knives South Pole Apocalypse Finish 2020 Biohazard Edition, Elmax, Natural Canvas Micarta, survival knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

TRC Knives South Pole Apocalypse Finish 2020 Biohazard Edition, Elmax, Natural Canvas Micarta, survival knife

Relevant topics