Eden EQP001 Wooden Cutting Board

notforsale

not_replaced_in

productlabel

Zwilling Life vegetable knife, 38580-091-0

legal_agecheck_key

Zwilling Life gourmet peeler, 38580-101-0

Zwilling Life carving knife, 38580-161-0

Zwilling Life chef's knife 20 cm, 38581-201-0

Skerper Basic diamond sharpening steel 30 cm, SH005

Blade length: 18 cm
Total length: 31 cm
Weight: 129 grams

The **Zwilling Life santoku** is perfect when cutting meat, fish and vegetables. The dimples make sure the ingredients don't stick to the blade. Especially when cutting slices this is perfect. 


 The blade is made from ice-hardened steel. The result is the right hardness of the steel. The quality of the steel convinces with an optimal balance of chromium and carbon content. According to Zwilling this leaves you with the perfect mix between hardness, sharpness retention, ability to sharpen and resistance to chipping. 


The ergonomically shaped handle feels great in hand, even in large hands. The handle is relatively rough. As such it feels comfortable, even while wearing gloves or when your hands are wet. The handle is enhanced with the characterizing Zwilling logo.


The transition from the crop to the blade is seamless. This is ergonomically sound, but also great in terms of hygiene. However, we recommend cleaning the knives by hand. When you clean them in your dishwasher the blade and handle can wear out faster. 


## Zwilling Life: simple and affordable


 If you are looking for German decency for an affordable price the Zwilling Life collection has got you covered. The Life collection is characterized by an excellent price-quality ratio. The simple nature, combined with the comfortable plastic scales, make this knives easy to use. The knives are relatively light-weight and enhanced with a razor-sharp blade. You cannot go wrong with the knives from the Life collection. 



Zwilling Life santoku knife, 38588-181-0

brand

colour

series

handedness

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Zwilling Life santoku knife, 38588-181-0

Zwilling Life santoku knife, 38588-181-0

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Zwilling Life santoku knife, 38588-181-0

Zwilling Life santoku knife, 38588-181-0

Zwilling Life santoku knife, 38588-181-0

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Zwilling Life santoku knife, 38588-181-0

Relevant topics