Name: Hultafors MK Painter's Knife 380040
Brand: Hultafors
SKU: HF380040
Price: 7.45 EUR
Availability: InStock
Rating: 9.14286 (7 reviews)

NiteCore NSH10 carabiner

notforsale

not_replaced_in

Nite Ize Figure 9 carabiner, small

msrp_price

Fenix E12 V2.0 flashlight

productlabel

Ledlenser K1 keychain torch

Ledlenser K1L keychain torch

Ledlenser K2 keychain torch

Ledlenser P3 Core flashlight, 90 lumens

Maglite Solitaire Classic, silver

Maglite Mini torch AAA, grey

strike_price

Victorinox A.6144.0 Pen small

Böker Magnum John Jay Survival Knife 02SC004

legal_agecheck_key

Böker Magnum Desert Warrior 2.0 02SC012 survival knife

Fish Bone, Snapper, Stainless Steel

KA -BAR 1118BP neckknife

KA-BAR Jarosz Rambler Skeleton neck knife, 7001BP

Knivesandtools 550 paracord type III, colour: oceans of fire, 50 ft (15.24 m)

Knivesandtools EDC pouch

Tasmanian Tiger Tac Pouch 5 multicam

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Hultafors Flint FS fire steel, 380280

Skerper Basic sharpening pen with a diamond steel, SO001

SOG Entrenching Tool - F08-N folding shovel

WE Knife Titanium Emergency whistle 120dB blue, A-05B

Kershaw PT1 8800 Pry Tool 1 keychain tool

Lansky P.R.E.P. Survival Pack

Fenix E28R rechargeable EDC flashlight

Hultafors felling axe HY 10-1.75 900/3, 840206

Hultafors Trekking axe H 008 SV, 840066

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Lansky Professional sharpening system, LKCPR

Hultafors splitting axe KLY 7-1.5 RA, 840592

Handle/blade: polypropylene/carbon fiber Blade length: 9,2 cm Weight: 80 grams


The **Hultafors MK Painter’s Knife** is a fixed knife for painters. This knife is specifically designed to assist painters in the tasks that they perform on a daily basis. For instance, the blade has a flat screwdriver on the tip. This is ideal for removing socket outlets from the wall, for example. There is a notch just behind this screwdriver that can be used to pop the lid off a paint can, so you don't have to use and damage the knife's edge to do this.



The blade is made from Japanese carbon steel. This is a sturdy steel that is easy to sharpen. It isn't stainless, though, so take care around moisture and acids. The handle is made from polypropylene. This is a durable plastic that will last for years and years.



The knife comes with a handy sheath so you can carry it on a belt up to 4 cm wide. You can also hang it from a button on your overalls. To do this, unclip the belt loop, slide the button in and then click it into place. Very practical!




Hultafors MK Painter's Knife 380040

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Hola:

Excelente para pintores: la forma del lomo de la punta permite abrir fácilmente botes de pintura.

La punta de destornillador es útil para tornillos medianos pero para los tornillos de bases de enchufe, interruptores, etc, es demasiado gruesa y es necesario retocarla.

Recomiendo comprar este cuchillo y no sólo a los pintores.

Saludos


Beste alledagse werkmens aan m'n werkbroek... Ga je de winkel binnen in werkkledij zegt de bewakingsfirma "mijnheer uw mes!!" ..dan toon de schrofdraaierspunt .... 
en zeggen ze Ho... nice 👍
Voor de rest,zijner de'r echt niet zacht mee ... joint afkrabben van flenzen, open wrikken met punt of lemmet ... Sterk mesje🤘...
Terug scherp zetten is ook prima, durf wat roesten maar dat ligt dan aan jou omdat je hem niet onderhoud...

orderNumber

reaction

reviewDate

Ik ben bekend met het schildersvak en was vooral nieuwsgierig wat dit mes zou toevoegen.
Ik ben er nog niet helemaal achter gekomen.
Staat nog ongebruikt in de kast.

werkmesje... perfect om te krabben, peuteren en wrikken ... ;-}

Dit bijzondere mes gekocht voor een verfman. Deze heeft het nog niet in handen gekregen dus over het gebruik kan ik niets vermelden. Het ziet er wel goed uit en is zeer redelijk geprijsd. Niet heel scherp uit de verpakking dus daarmee moest ik zelf aan de slag.

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Reviews for Hultafors MK Painter's Knife 380040

Reviews for Hultafors MK Painter's Knife 380040

Reviews

Average rating

Reviews for Hultafors MK Painter's Knife 380040