Name: Böker Plus Piko 01BO612 pocket knife, David Curtiss design
Brand: Böker
SKU: BO01BO612
Availability: OutOfStock

Work Sharp Angle Set knife sharpener, WSBCHAGS

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Böker Plus Fat Box Pen 09BO140 tactical pen

legal_agecheck_key

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

Böker Hamburger Pouch 90086, EDC-pouch

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Böker Pure Camellia oil 04BO175, 100ml

Knivesandtools 550 paracord type III, colour: acu, 100 ft (30.48 m)

Böker Plus Bit Pen 09BO128 tactical pen

Böker Plus Trucker Cap 09BP0009

Boker Plus Tool kit Hex key

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Handle/blade: stainless steel/440C
Blade length: 3.3 cm
Weight: 45 grams

The **Böker Plus Piko 01BO612** is a tiny pocket knife, designed by Davis Curtiss. With a total length of 8.8 cm this is one of the smallest pocket knives in our range. With many other knives you see that, with this size, you compromise on materials, finish or functions. This is not the case for the Böker Piko. You open the Böker Piko with the flipper, and because of the ball bearings it will open quickly. When opened the blade is locked by a framelock. You don't often see this on a knife with this size.



The blade is made from stainless 440C steel and the handle is made from stainless steel. 440C is a stainless type of steel that is nicely balanced. As such it retains its sharpness well, is easy to sharpen and nice and tough. Perfect for EDC use.




Böker Plus Piko 01BO612 pocket knife, David Curtiss design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Plus Piko 01BO612 pocket knife, David Curtiss design

Böker Plus Piko 01BO612 pocket knife, David Curtiss design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus Piko 01BO612 pocket knife, David Curtiss design

Böker Plus Piko 01BO612 pocket knife, David Curtiss design

Böker Plus Piko 01BO612 pocket knife, David Curtiss design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus Piko 01BO612 pocket knife, David Curtiss design

Relevant topics