Name: Böker Plus Toro 01BO758 karambit pocket knife, Boris Manasherov design
Brand: Böker
SKU: BO01BO758
Availability: BackOrder

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Knife Pouch Black, by Maxpedition

Böker Knife Vault Large 09BO154 knife bag

Böker Presentation Pad 099912 display mat

Knivesandtools #OneKnifeStand, knife stand

Skerper Basic sharpening set 180/600/1000/3000 with diamond sharpening steel, SH006

Skerper Pocket Strop STP002, stropping paddle

Böker 090062 storage case for pocket knives

Böker Knife Vault Small 09BO153 knife bag

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Lansky Masters Edge Sharpener, MEDGE1

Nano-Oil 10w maintenance oil 8cc/8ml

Zippo Classic 204-000243, Brushed Solid Brass, lighter

Zippo Classic Armor 162-000003, Brushed Chrome, lighter

Fallkniven Diamond Ceramic Whetstone DC4

DMT Aligner ProKit sharpening system

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Böker Plus Tango Bar 09BO900 pry bar, Peter Fegan design

Handle/blade: G10/D2
Blade length: 7.8 cm
Weight: 160 grams

The **Böker Plus Toro 01BO758** is a remarkable karambit pocket knife, designed by Boris Manasherov. The most striking is the blade. It is namely enhanced with a recurve and a downward curved tip. Because of this 'hollow' edge you pull the material you wish to cut towards the edge. As such it works very efficiently.



Boris Manasherov used a 'wave opener' for this pocket knife. This is protrusion on the spine of the blade which gets caught behind the edge of your pocket as you pull it out. The result is that the knife opens quickly. The knife also contains a flipper.



When opened the blade is blocked by a solid linerlock. As such the knife will never close when you don't want it to. The blade is made from is tough D2-steel. A type of tool steel that is similar to stainless steel but can stain during long-term exposure to acids.




Böker Plus Toro 01BO758 karambit pocket knife, Boris Manasherov design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Plus Toro 01BO758 karambit pocket knife, Boris Manasherov design

Böker Plus Toro 01BO758 karambit pocket knife, Boris Manasherov design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Böker Plus Toro 01BO758 karambit pocket knife, Boris Manasherov design

Böker Plus Toro 01BO758 karambit pocket knife, Boris Manasherov design

Böker Plus Toro 01BO758 karambit pocket knife, Boris Manasherov design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Böker Plus Toro 01BO758 karambit pocket knife, Boris Manasherov design

Relevant topics