Name: Buck 110 Slim Knife Select Grey 0110GYS2 pocket knife
Brand: Buck
SKU: BUCK110GYS2
Price: 48.95 EUR
Availability: BackOrder

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Buck 110 Folding Hunter Heavy Duty Polyester Sheath 0110-15-BK1 Black, sheath

Skerper Pocket Strop STP002, stropping paddle

Knivesandtools #OneKnifeStand, knife stand

Skerper Maintenance Oil Pen MA002, 10 ml

Buck 00110S belt sheath for the 110 Folding Hunter

Fallkniven Diamond Ceramic Whetstone DC4

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Schmuckatelli Buck Knives Anvil Bead Pewter

Buck Deuce 0375BRS pocket knife

legal_agecheck_key

Buck Waffle Knit Beanie 89170 Blaze Orange, beanie

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Handle/blade: FRN/420HC
Blade length: 9.0 cm 
Weight: 85 grams

This **Buck 110 Slim EDC** is a slim, light-weight version of the famous Buck 110 Folding Hunter. This Slim 110 was designed for those who carry a knife on a daily basis. You can easily open it with one hand, and it is enhanced with a pocket clip to make sure it will always stay in place in your pocket.

 The contours of the Buck 110 Slim are the same as those of the normal 110 Folding Hunter. The use of materials and the finishes, however, are different. The handle, for instance, is made from light-weight FRN. This is an extremely strong type of plastic. Quite the change when compared to the heavy brass, because the Buck 110 Slim only weighs 85 grams. The blade is made from 420HC. Simply because there is nothing wrong with it. A great type of steel, especially when it is hardened according to the BOS recipe, like this knife is. Buck, however, did change the finish. The blade on the Buck 110 Slim is enhanced with a stonewashed finish. This means that it was placed in a rotating drum filled with stones, leaving tiny scratches on the blade. So much it makes the blade look polished. As a result traces of use will hardly stand out.

 You open the blade with the double thumb studs. When opened a solid backlock locks the blade. As such it will never accidentally close. The pocket clip can be placed on both sides of the handle and opening and closing the knife can easily be done by left and right-handed users. As such this knife is a real friend to all.



Buck 110 Slim Knife Select Grey 0110GYS2 pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Buck 110 Slim Knife Select Grey 0110GYS2 pocket knife

Buck 110 Slim Knife Select Grey 0110GYS2 pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Buck 110 Slim Knife Select Grey 0110GYS2 pocket knife

Buck 110 Slim Knife Select Grey 0110GYS2 pocket knife

Buck 110 Slim Knife Select Grey 0110GYS2 pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Buck 110 Slim Knife Select Grey 0110GYS2 pocket knife

Relevant topics