Name: Case Slim Trapperlock SparXX Green Pearl Kirinite Smooth, 27376, 10154AC SS pocket knife
Brand: Case Knives
SKU: CE27376
Availability: OutOfStock

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Case Large Leather Knife Case 01079

Case EZ-Hone sharpening system, 09398

Case Tri-Hone sharpening system, 09399

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

productlabel

Case Medium Leather Knife Case 01075

Case Russlock 71383 SparXX, Smooth Green Kirinite 101953L pocket knife

legal_agecheck_key

Case Trapper 71380 SparXX, Smooth Green Kirinite 10254 pocket knife

Case Peanut 71384 SparXX, Smooth Green Kirinite 10220 pocket knife

Knives and Tools Knife Cleaning Mat, rubber

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1166H, camo green, 100 ft (30.48 m)

Case Stainless Steel Travel Mug 52476

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Case Woodchuck Countertop Display, Birch Wood, 64325, knife display for five knives

Handle/blade: kirinite/Tru-Sharp SS
Blade length: 8.1 cm
Weight: 100 grams

The **Case Kickstart Trapperlock** is a traditional pocket knife with a modern twist. The thumb rest with which you open it one-handedly is immediately noticeable, but when you use it you only notice what is in the grip. This is because there is a spring that helps with the opening with the thumb rest. When open, the blade is blocked by a liner lock.

 ## Case Tru-Sharp SS steel

 The blade is made from Case Tru-Sharp SS. This is a stainless type of steel that is similar to 420HC steel. Characteristic of this type of steel is that it can be sharpened super sharp very quickly.

 ## SparXX Green Pearl Kirinite

 The handle is made from *SparXX Green Pearl Kirinite*. This is a type of plastic that is enhanced with fine glitters. This gives the handle a sparkling appearance. Something striking, something special.

 ## Case Knives: traditional pocket knives

 knives Case has been making pocket knives since 1889. Each pocket knife is assembled and finished by hand, relatively unique for an American brand. As a result each Case knife is unique. Case knives are incredibly collectible and a great addition to your standard EDC pocket knife. Nice as a gift, for someone else as well as for yourself.



Case Slim Trapperlock SparXX Green Pearl Kirinite Smooth, 27376, 10154AC SS pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Case Slim Trapperlock SparXX Green Pearl Kirinite Smooth, 27376, 10154AC SS pocket knife

Case Slim Trapperlock SparXX Green Pearl Kirinite Smooth, 27376, 10154AC SS pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Case Slim Trapperlock SparXX Green Pearl Kirinite Smooth, 27376, 10154AC SS pocket knife

Case Slim Trapperlock SparXX Green Pearl Kirinite Smooth, 27376, 10154AC SS pocket knife

Case Slim Trapperlock SparXX Green Pearl Kirinite Smooth, 27376, 10154AC SS pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Case Slim Trapperlock SparXX Green Pearl Kirinite Smooth, 27376, 10154AC SS pocket knife

Relevant topics