Name: Chris Reeve Knives Large Sebenza 21 CGG Lunar Landing L21-1260 pocket knife
Brand: Chris Reeve Knives
SKU: CRL21-1260
Availability: OutOfStock

Handle/blade: 6Al4A Titanium/CPM S35VN
Blade length: 7.6 cm
Weight: 82 grams

The **Chris Reeve Large Sebenza Lunar Landing** is a special edition of the legendary Sebenza. This version was released in honour of the 50th anniversary of the first moon landing. On the front you will find a very nice scene of the first steps on the moon. In the front is a beautiful cabuchon of Chrysocolla inlaid. It represents the earth as seen from the moon. The total mission to the moon lasted 8 days, 3 hours, 18 minutes and 35 seconds: These facts are engraved on the lock side. A unique and short-term edition for the year 2019. While stocks last.

 Of course, the quality of the finish is extremely good. Of course there are other manufacturers who produce such knives, but we have never found such a high level of quality in a seemingly rather sober pocket knife.

 The hollow grind blade is enhanced with a manually applied convex edge. It is made from S35VN, an advanced powder metallurgical type of steel. The knife is easy to open with one hand thanks to a titanium thumb stud, after which it locks with an extremely strong frame lock when opened. Chris Reeve is the original inventor of this framelock.

 The blade is enhanced with the stonewashed look. This can best be described as a kind of satin gloss; it is not completely matte, but also not completely polished. This finish masks traces of use. Like all Chris Reeve Knives the Sebenza is razor-sharp.

 **Scope of delivery**
* Chris Reeve Sebenza 21 Small knife
* Chris Reeve lubricant
 * Allen key
* Chris Reeve maintenance cloth
 * Leather slip-pouch
 


Chris Reeve Knives Large Sebenza 21 CGG Lunar Landing L21-1260 pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Chris Reeve Knives Large Sebenza 21 CGG Lunar Landing L21-1260 pocket knife