Name: CRKT BT Fighter 5225 pocket knife, Brian Tighe design
Brand: CRKT
SKU: CK-5225
Availability: BackOrder

Knivesandtools #EveryDayCloth, micro-fibre cloth

notforsale

not_replaced_in

Skerper Pocket Strop STP002, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 ml

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

CRKT Iota Black 9085K, Tom Stokes design

legal_agecheck_key

CRKT Knife Maintenance Tool 9704, Tom Stokes design

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

CRKT Squid pocket knife stonewash-2490

CRKT Hex Bit Driver, Brass, 9911-2, Scout Tools design

Work Sharp Guided Field Sharpener, WSGFS221

CRKT 9110C, Eat'N Tool XL, bead blast

Fallkniven Diamond Ceramic Whetstone DC4

CRKT 9100KC, Eat'N Tool, Black

Handle/blade: FRN/8Cr13MoV
Blade length: 9.2 cm 
Weight: 140 grams

The **CRKT BT Fighter 5225** is a cool EDC pocket knife, designed by Brian Tighe. This designer is known for his eccentric designs. You also see these design elements when you look at the BT Fighter. From the large finger grooves and the wide end of the handle, to the use of the button lock and the textures on the surface.



The BT Fighter is a quite a large EDC knife. Not for small pockets. But that doesn't make it any less cool. On the contrary! Because of the large amount of subtle details on the handle it is perfectly in proportion.



There are two ways to open the CRKT BT Fighter: with the flipper and the thumb stud. Because of the IKBS ball bearings the knife moves smoothly. Combined with the button lock this ensures a high *fidget factor*. It is fun to play with.



The blade is made from 8Cr13MoV: simple, corrosion resistant, tough and easy to sharpen. Simply good for a knife like this. The handle is made from FRN. A glass reinforced plastic that is very light but also very strong. To finish the whole the BT Fighter Compact is enhanced with a typical *Tighe*-clip. The Y-shaped clip is enhanced with a ceramic ball that ensures it easily slides over the edge of your pocket, without breaking it.




CRKT BT Fighter 5225 pocket knife, Brian Tighe design

value_blade_length

CRKT BT Fighter Compact 5220 pocket knife, Brian Tighe design

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_opened_length

value_blade_thickness

brand

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT BT Fighter 5225 pocket knife, Brian Tighe design

CRKT BT Fighter 5225 pocket knife, Brian Tighe design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

CRKT BT Fighter 5225 pocket knife, Brian Tighe design

CRKT BT Fighter 5225 pocket knife, Brian Tighe design

CRKT BT Fighter 5225 pocket knife, Brian Tighe design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

CRKT BT Fighter 5225 pocket knife, Brian Tighe design

Relevant topics