Name: CRKT M40-03 pocket knife, Kit Carson design
Brand: CRKT
SKU: CK-M40-03
Price: 149.95 EUR
Availability: InStock

Knivesandtools #EveryDayCloth, micro-fibre cloth

notforsale

not_replaced_in

Skerper Pocket Strop STP002, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 ml

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

CRKT Iota Black 9085K, Tom Stokes design

legal_agecheck_key

CRKT Knife Maintenance Tool 9704, Tom Stokes design

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

CRKT Squid pocket knife stonewash-2490

CRKT Hex Bit Driver, Brass, 9911-2, Scout Tools design

Work Sharp Guided Field Sharpener, WSGFS221

CRKT 9110C, Eat'N Tool XL, bead blast

Fallkniven Diamond Ceramic Whetstone DC4

CRKT 9100KC, Eat'N Tool, Black

Handle/blade: GRN/1.4116
Blade length: 8.8 cm 
Weight: 118 grams

The **CRKT M40-03** is a solid pocket knife, designed by the legendary Kit Carson. Famous from, amongst others, the CRKT M16 collection and the M21 collection. The M40 collection is inspired by these popular knives. You can clearly see this when you look at the end result. The addition of the Deadbolt lock, however, is new.

 The Deadbolt lock is one of the strongest lockings mechanisms on the market today. The most important part of the Deadbolt lock is the hardened steel wedge that falls into the cut-outs in the blade. This construction is so strong it can handle quite a lot. It is also incredibly easy to use: you simply press the large pivot and close the blade as such.

 You open the pocket knife with the flipper. It is enhanced with a texture to make sure opening the knife is a piece of cake. Because of the use of IKBS ball bearings this is very easy. The handle is comprised of aluminium bolsters with GRN scales: glass reinforced nylon. Both aluminium and GRN are very light-weight. As such the weight of the M40-03 was kept low. The GRN is enhanced with a chic pattern. As such you have more grip over the knife, and it simply looks great!



CRKT M40-03 pocket knife, Kit Carson design

value_blade_length

CRKT M40-02 pocket knife, Kit Carson design

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_opened_length

value_blade_thickness

brand

sharpening_angle

value_blade_height

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT M40-03 pocket knife, Kit Carson design

CRKT M40-03 pocket knife, Kit Carson design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

CRKT M40-03 pocket knife, Kit Carson design

CRKT M40-03 pocket knife, Kit Carson design

CRKT M40-03 pocket knife, Kit Carson design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

CRKT M40-03 pocket knife, Kit Carson design

Relevant topics