Gerber Downwind Caper 30-001820 Black G10, hunting knife

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Ballistol maintenance oil, 50 ml

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Pocket Strop STP002, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 ml

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Shapton Glass Stone Seven sharpening set, 70708

 KME Precision Knife Sharpening System, R.P.S.H. Combo Kit, KF-CBO

Fox Bean Gen 2 Full Black BF-719G10 Black Fox pocket knife, Serge Panchenko design

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Fox Knives Racli BF-744ZW Black Fox, Zebra wood pocket knife, Simonutti design

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Lansky Pocket Ceramic Sharpening System

Fenix E28R rechargeable EDC flashlight

Nano-Oil 10w maintenance oil 8cc/8ml

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

The **Fox Edge Mandatory Fun** is a slim, cool EDC pocket knife. You open it with the help of the thumb studs or the flipper. When opened, the blade is locked by a solid framelock. As a result your fingers are safe. The handle is made from black G10. Solid and lightweight. It looks amazing and offers enough grip. The handle is enhanced with a number of finger grooves. As such you have even more grip over the knife. The backspacer is also made from black G10. The blade is made from 8Cr13MoV steel. A stainless type of steel that retains its sharpness well and is also easy to sharpen. 

The pocket clip nicely falls in the handle. As such you can easily take the knife with you, no matter where you go. The handle has a slim design and is made from lightweight materials. As such the knife as a whole is also very lightweight.

Fox Edge Mandatory Fun, Black G10, FE-024 pocket knife 

handle_material

Fox Edge Mandatory Fun, Tan Micarta, FE-025 pocket knife

colour

handedness

blade_finish

opening_system

knife_edge_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

expectedRestockDate

zm_series

valueForMoneyStars

meetsExpectationsStars

authorCity

Netjes solide zakmes. Goed scherp uit de doos en prima afgewerkt, zeker als je kijkt naar de prijs. Het lemmet opent zich soepel. Sluiten kost iets meer moeite. Ik kan niet bepalen of dat alleen geldt voor mijn exemplaar of dat het standaard is. Ik vind het geen probleem. Klein genoeg om in je achterzak te passen en groot genoeg voor de meeste klussen. Blij mee.

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Fox Edge Mandatory Fun, Black G10, FE-024 pocket knife

Fox Edge Mandatory Fun, Black G10, FE-024 pocket knife

Full description

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Fox Edge Mandatory Fun, Black G10, FE-024 pocket knife

Fox Edge Mandatory Fun, Black G10, FE-024 pocket knife

Fox Edge Mandatory Fun, Black G10, FE-024 pocket knife

Full description

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Fox Edge Mandatory Fun, Black G10, FE-024 pocket knife

Relevant topics