Name: GiantMouse ACE Iona G10 Black, Tumbled pocket knife, Ansø en Voxnaes design
Brand: GiantMouse
SKU: GMIONA-G10-BLK
Price: 124.95 EUR
Availability: OutOfStock

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

GiantMouse Morbid Mouse Mini Brass, bottle opener

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

productlabel

GiantMouse Caplifter / Pry-bar, Titanium, Ansø and Voxnaes design

Knives and Tools Knife Cleaning Mat, rubber

GiantMouse Copper Lanyard Bead

GiantMouse Bronze Lanyard Bead

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Handle/blade: G10/M390
Blade length: 7.3 cm 
Weight: 75 grams

The **GiantMouse Ace Iona** is an affordable pocket knife, made from top-quality materials. It is the first knife with a blade made from Böhler M390 steel which can be offered for such an amazing price. You use the Iona as a light-weight EDC knife you can carry out almost any task with. From peeling an apple to opening boxes and packages: the Iona can do it all.



You open the Iona with the thumb stud. It will open smoothly and is locked by a linerlock. In between the blade and the handle you will find phosphor bronze washers. These washers ensure that the knife runs smoothly. The handle is made from G10. A strong composite material that is made from fibreglass and synthetic resin.



The GiantMouse Iona was designed by Jesper Voxnaes and Jens Ansø. These two Danish designers belong to the most popular designers in the pocket knife world. Each have their own design philosophy and when they work together you will get the best of both worlds. Danish design at its best. Combine that with Italian production and you will know that the Iona is a stunning knife.



## GiantMouse ACE-line


The GiantMouse ACE-line was developed to meet the ever-growing demand for GiantMouse knives. After a couple of limited edition knives that were sold out in the blink of an eye the demand continued to grow. Hence the ACE-collection. Designs with the same cool style, with the same premium type of steel, but more accessible to all.




GiantMouse ACE Iona G10 Black, Tumbled pocket knife, Ansø en Voxnaes design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

GiantMouse ACE Iona G10 Black, Tumbled pocket knife, Ansø en Voxnaes design

GiantMouse ACE Iona G10 Black, Tumbled pocket knife, Ansø en Voxnaes design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

GiantMouse ACE Iona G10 Black, Tumbled pocket knife, Ansø en Voxnaes design

GiantMouse ACE Iona G10 Black, Tumbled pocket knife, Ansø en Voxnaes design

GiantMouse ACE Iona G10 Black, Tumbled pocket knife, Ansø en Voxnaes design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

GiantMouse ACE Iona G10 Black, Tumbled pocket knife, Ansø en Voxnaes design

Relevant topics