Name: KA-BAR TDI Flipper Folder 2490 pocket knife, John Benner design
Brand: KA-BAR
SKU: KA2490
Price: 94.95 EUR
Availability: InStock

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Pocket Strop STP002, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

KA-BAR Snody crisis card 5104

legal_agecheck_key

KA-BAR Dessert Destroyer 9928 ice cream scoop

Skerper Arkansas Tactical Sharpening Stone NATA01, Hard Black Arkansas

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KA-BAR 4073BP necker

KA-BAR Lake Effect ice scraper

KA-BAR Emergency Whistle 9925 emergency whistle, set of two

KA-BAR Barley bottle opener

KA-BAR Skull Patch KBPATCH1

KA-BAR Squadron Patch KBPATCH2

Skerper Professional sharpening set 220/1000/2000/5000, dressing stone + holder

Spyderco 303FCBN2 Double Stuff 2 pocket sharpening stone

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Work Sharp Angle Set knife sharpener, WSBCHAGS

Work Sharp Guided Field Sharpener, WSGFS221

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Handle/blade: G10 and stainless steel/AUS8A
Blade length: 8.7 cm
Weight: 135 grams

The **KA-BAR TDI Flipper Folder 2490** is a tough and practical EDC pocket knife, designed by John Benner. When in doubt go with black. This is true for your outfit, but also for your KA-BAR pocket knife. You open the TDI Flipper Folder with the flipper. You can also use the thumb studs, even though they serve more as a stop-pin.

 The handle and the blade are black. G10 and stainless steel for the handle, AUS8A stainless steel for the blade. When opened the blade is blocked by a solid framelock. The great thing about this pocket knife is that the profile is nice and slim even though it has a 9 cm blade. Practical!



KA-BAR TDI Flipper Folder 2490 pocket knife, John Benner design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

KA-BAR TDI Flipper Folder 2490 pocket knife, John Benner design

KA-BAR TDI Flipper Folder 2490 pocket knife, John Benner design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

KA-BAR TDI Flipper Folder 2490 pocket knife, John Benner design

KA-BAR TDI Flipper Folder 2490 pocket knife, John Benner design

KA-BAR TDI Flipper Folder 2490 pocket knife, John Benner design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

KA-BAR TDI Flipper Folder 2490 pocket knife, John Benner design

Relevant topics