Name: Kizer Deviant V3575A2 G10, Micarta, M390 pocket knife, Chris Conaway design
Brand: Kizer
SKU: KZV3575A2
Price: 212 EUR
Availability: OutOfStock

Kizer Deviant V3575A1 Copper, Micarta, M390 pocket knife, Chris Conaway design

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

Knives and Tools Knife Cleaning Mat, rubber

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

productlabel

Knivesandtools 550 paracord type III, colour: white w/ glow in the dark, 100 ft (30.48 m)

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Skerper Maintenance Oil Pen MA002, 10 ml

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Handle/blade: G10 and micarta/M390
Blade length: 7.8 cm 
Weight: 100 grams

The **Kizer Deviant V3575** is a cool EDC pocket knife, designed by Chris Conaway. The sheepsfoot blade stands out. The edge is located a little lower than the base of the handle. As such the Deviant is great for food prep. Whether you use it at home in your kitchen, or close to the campfire.



The bolster on the handle is in nice contrast with the micarta handle. You easily open this knife with the thumb stud and the solid liner lock locks it to make sure your fingers are safe.



The blade is made from Böhler M390 steel. This is a popular, premium type of steel. Popular because it retains its sharpness for a really long time and is also corrosion resistant. Great qualities for an EDC pocket knife such as this.




Kizer Deviant V3575A2 G10, Micarta, M390 pocket knife, Chris Conaway design

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_length

value_opened_length

value_blade_thickness

brand

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Kizer Deviant V3575A2 G10, Micarta, M390 pocket knife, Chris Conaway design

Kizer Deviant V3575A2 G10, Micarta, M390 pocket knife, Chris Conaway design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Kizer Deviant V3575A2 G10, Micarta, M390 pocket knife, Chris Conaway design

Kizer Deviant V3575A2 G10, Micarta, M390 pocket knife, Chris Conaway design

Kizer Deviant V3575A2 G10, Micarta, M390 pocket knife, Chris Conaway design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Kizer Deviant V3575A2 G10, Micarta, M390 pocket knife, Chris Conaway design

Relevant topics