Name: Kizer Sliver Ki4419A2 sunburst blue pocket knife
Brand: Kizer
SKU: KZKI4419A2
Price: 79.8 EUR
Availability: OutOfStock
Rating: 10 (1 reviews)

Knivesandtools #EveryDayCloth, micro-fibre cloth

notforsale

not_replaced_in

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools Knife Pouch Wolf Grey, by Maxpedition

Skerper Maintenance Oil Pen MA002, 10 ml

Kizer T111 Crocotool, Evgeny Polukhin design

legal_agecheck_key

Kizer Siren I T106A1 keychain tool

Kizer Siren I T106A2 keychain tool

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Zippo Classic 254B-001678, High Polish Brass, lighter

Zippo Classic 218-002801, Black Matte, lighter

Nano-Oil 10w maintenance oil 8cc/8ml

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Lansky Masters Edge Sharpener, MEDGE1

Handle/blade: aluminium/S35VN
Blade length: 9.1 cm 
Weight: 89 grams

The **Kizer Sliver** is a light-weight and strong pocket knife. The luxurious packaging and the included pouch are a sight for sore eyes. The included cleaning cloth is also very practical. The blade is made from CPM SV35VN and is razor-sharp upon delivery. This type of steel is powder metallurgical and can easily be sharpened razor-sharp. The tough stonewashed finish on the blade masks any traces of use. Thanks to the thin aluminium frame the knife weighs next to nothing. The steel liners add strength to the frame. The jimping on the spine of the blade and the stunning 'sunburst' pattern on the handle provide you with enough grip. Both sides of the blade are enhanced with thumb studs you can use to easily open the blade. A liner-lock takes care of the lock.



Kizer Sliver Ki4419A2 sunburst blue pocket knife

handle_material

Kizer Sliver Ki4419A5 micarta pocket knife

colour

handedness

blade_finish

opening_system

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

expectedRestockDate

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Kizer Sliver Ki4419A2 sunburst blue pocket knife

Kizer Sliver Ki4419A2 sunburst blue pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Kizer Sliver Ki4419A2 sunburst blue pocket knife

Kizer Sliver Ki4419A2 sunburst blue pocket knife

Kizer Sliver Ki4419A2 sunburst blue pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Kizer Sliver Ki4419A2 sunburst blue pocket knife

Relevant topics