Name: Kizer Vanguard Zipslip V3507N1 black pocket knife, Michael Vagnino design
Brand: Kizer
SKU: KZV3507N1
Price: 66.5 EUR
Availability: OutOfStock

Knivesandtools #EveryDayCloth, micro-fibre cloth

notforsale

not_replaced_in

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools Knife Pouch Wolf Grey, by Maxpedition

Skerper Maintenance Oil Pen MA002, 10 ml

Kizer T111 Crocotool, Evgeny Polukhin design

legal_agecheck_key

Kizer Siren I T106A1 keychain tool

Kizer Siren I T106A2 keychain tool

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Zippo Classic 254B-001678, High Polish Brass, lighter

Zippo Classic 218-002801, Black Matte, lighter

Nano-Oil 10w maintenance oil 8cc/8ml

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Lansky Masters Edge Sharpener, MEDGE1

Handle/blade: G10/N690
Blade length: 7.3 cm
Weight: 105 grams

The **Kizer Vanguard Zipslip** is a slipjoint pocket knife, designed by Michael Vagnino. The fact that it is a slipjoint means that the pocket knife doesn't have a real lock. Only a slight resistance that prevents the knife from immediately closing. As such you can legally carry this pocket knife in many places in Europe. You open it with one hand with the practical thumb hole. You immediately notice that the slipjoint is enhanced with a practical half-stop. This means that when closing the knife you have enough time to make sure your fingers are nowhere near the razor-sharp blade.

 The blade is made from N690-steel. A good type of steel that retains its sharpness well. The handle is made from G10 and enhanced with a deep-carry pocket clip. Because of its cool look and the use of high-end materials the Zipslip is a modern incarnation of the classic slipjoint.



Kizer Vanguard Zipslip V3507N1 black pocket knife, Michael Vagnino design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Kizer Vanguard Zipslip V3507N1 black pocket knife, Michael Vagnino design

Kizer Vanguard Zipslip V3507N1 black pocket knife, Michael Vagnino design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Kizer Vanguard Zipslip V3507N1 black pocket knife, Michael Vagnino design

Kizer Vanguard Zipslip V3507N1 black pocket knife, Michael Vagnino design

Kizer Vanguard Zipslip V3507N1 black pocket knife, Michael Vagnino design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Kizer Vanguard Zipslip V3507N1 black pocket knife, Michael Vagnino design

Relevant topics