Name: Medford 187 F, D2 Tumbled Blade, Tumbled Handle, pocket knife
Brand: Medford
SKU: MF-23-187-TH
Price: 712.95 EUR
Availability: BackOrder

Knivesandtools #EveryDayCloth, micro-fibre cloth

notforsale

not_replaced_in

Skerper paddle strop Viking, rough, stropping paddle

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

TSPROF Blitz 360 Complete sharpening system

Ballistol maintenance cloths, 10 pcs

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Edge Pro Professional Kit 4, sharpening system

Fallkniven Diamond Ceramic Whetstone DC4

Sentry Solutions-Marine Tuf-Cloth

Wicked Edge Generation 3 Pro sharpening system

The **Medford 187** is a large pocket knife, made by Medford Knife & Tool in the United States. You open it with the remarkably shaped flipper. The hollow grind on the D2 steel blade was applied by hand. This is a unique feature: only few producers apply a hollow grind by hand. When opened, a solid framelock keeps the blade securely in place. Medford pressed the stop-pin in the blade. As a result, it symmetrically leans against the handle. This adds strength.

## Medford 187 F blade

The hollow-ground blade is made from D2 steel. D2 is a tool steel that will require maintenance and oil. Some budget knives use D2 as a cheap option with a rudimentary heat treatment. Medford, however, does whatever it can to turn D2 into an amazing type of steel with excellent qualities. So definitely not a budget option!

## Medford 187 F handle

This version's presentation side is made from black G10. The lockside is made from titanium. The blade has a black PVD coating.

## About Medford

Each Medford knife is made by hand by talented knife makers. Individual differences therefore occur and make each knife unique. It takes approximately one year for Medford to ship their knives. Knives that are listed as in stock on our website are available and can be shipped immediately. So make sure you don't miss out: it might take a while for new stock to arrive!

Medford 187 F, D2 Tumbled Blade, Tumbled Handle, pocket knife

brand

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

legal_agecheck_key

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

videos

colour

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Medford 187 F, D2 Tumbled Blade, Tumbled Handle, pocket knife

Medford 187 F, D2 Tumbled Blade, Tumbled Handle, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Medford 187 F, D2 Tumbled Blade, Tumbled Handle, pocket knife

Medford 187 F, D2 Tumbled Blade, Tumbled Handle, pocket knife

Medford 187 F, D2 Tumbled Blade, Tumbled Handle, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Medford 187 F, D2 Tumbled Blade, Tumbled Handle, pocket knife

Relevant topics