Handle/blade: aluminium/14C28N
Blade length: 9.0 cm
Weight: 75 grams

The **Real Steel Metamorph Frontflipper 7836** is a slim and stylish EDC pocket knife. Ostap Hel was able to design a knife that is a combination of an EDC pocket knife and a gentleman's knife. Practical enough to function as an EDC knife, chic enough to cut a nice piece of steak.



You open the Real Steel G5 Metamorph Frontflipper with, as the name might already suggest, the front flipper. The blade will shoot from the handle and is locked by a framelock. The ball bearings around the pivot ensure that the knife will open smoothly for years to come, and the liner lock properly locks the knife when opened.



The blade is made from Sandvik 14C28N. A stainless type of steel that retains its sharpness well and is also easy to sharpen. The handle is made from top-quality aluminium. A great little detail is the hidden lanyard eye in the backspacer. En profil you won't see it, but it is still there to attach a lanyard.




Real Steel G5 Metamorph Front flipper 7836 Subdued Green pocket knife, Ostap Hel design

handle_material

notforsale

opening_system

zm_series

pocketknife_onehanded

blade_finish

value_blade_length

pocketknife_lock

legal_agecheck_key

knife_edge_type

value_blade_thickness

value_multitool_tools_number

value_opened_length

value_weight

brand

handedness

not_replaced_in

knife_bladeshape

expectedRestockDate

sharpening_angle

value_blade_height

multitool_tools

knife_sheath

colour

sharpening_type

pocketknife_steel

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Real Steel G5 Metamorph Front flipper 7836 Subdued Green pocket knife, Ostap Hel design