Name: Real Steel Horus E802 Black 7431, pocket knife
Brand: Real Steel Knives
SKU: RL7431
Availability: BackOrder

Handle/blade: G10/14C28N
Blade length: 9.3 cm
Weight: 145 grams

The **Real Steel Horus** is a cool and solid pocket knife that opens remarkably smoothly. Because of the ball bearings the blade will shoot from the handle. The Horus was designed by innovative German designer Uli Hennicke.


When opened the linerlock neatly keeps the blade in place. The spine of the blade has been enhanced with an additional detent to block the linerlock. As a result the blade can’t go anywhere, even during the more demanding tasks.


In terms of materials Real Steel chose a couple of proven options. For instance, the blade is made from Swedish Sandvik 14C28-steel and the handle is made from layered G10. Striking are the two screws that hold the frame together because you can see straight through the entire frame. A fun little detail that definitely makes this pocket knife stand out.


## Real Steel Knives: impressive knives for amazing prices


When it comes to an excellent price-quality ratio Real Steel is a winner. You rarely get so much knife for such an amazing price. Real Steel Knives uses decent materials and its years of experience in the pocket knife world to produce the knives you will need. Reliable, with a nice finish and amazingly priced. Could you ask for anything more?



Real Steel Horus E802 Black 7431, pocket knife

Real Steel Horus E802 Black/Blue 7432, pocket knife

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

notforsale

not_replaced_in

expectedRestockDate

legal_agecheck_key

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Real Steel Horus E802 Black 7431, pocket knife