Handle/blade: micarta/CPM S35VN
Blade length: 7.1 cm 
Weight: 50 grams

The **Real Steel Luna Premium** is a modern slipjoint pocket knife, designed by Jakub Wieczorkiewicz from Poltergeist Designs. The Luna is light-weight, razor-sharp and legal in many countries. You namely open it with two hands, and a complete lock is missing. There is only a slipjoint that offers some resistance.



The great thing about the Real Steel Luna is that the slipjoint is enhanced with a separate half-stop. This half-stop is not a new concept. People have been adding this for hundreds of year. Real Steel, however, did one thing slightly different. The half-stop comes earlier than the regular half-stops. As such your fingers are safer, and it enables you to close the knife with one hand.



The handle is made from micarta. The blade is made from CPM S35VN-steel. A premium type of American steel that retains its sharpness well.



The slim deep-carry pocket clip finishes the knife! As such you can discretely carry it in your pocket.




Real Steel Luna Premium Micarta Brown 7007 slipjoint pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

It's a good enough knife - nicely designed, well made, and light as you like. Nice pocket clip too. But it's nothing special, and doesn't stand out for any reason, and the micarta doesn't look or feel high-end, but rather tatty. At this price level I just expect more. Is it worth it? Only you can decide that for yourself, but I say it's not even close.

wunderschönes Messer (ist natürlich Geschmackssache), perfekt verarbeitet.
Mein erstes Messer "made in China". Hut ab vor dieser Qualität.

Service und Qualität bei Knives and Tools hervorragend.

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Real Steel Luna Premium Micarta Brown 7007 slipjoint pocket knife