Name: Ruike M108-TZ pocket knife
Brand: Ruike
SKU: RUM108-TZ
Price: 151.84 EUR
Availability: InStock
Rating: 10 (3 reviews)

Kizer Theta Ki4514 pocket knife, Elijah Isham design

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Ballistol maintenance oil, 50 ml

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Leatherman Brewzer

Lansky Masters Edge Sharpener, MEDGE1

Handle/blade: titanium/154CM
Blade length: 8.9 cm
Weight: 110 grams

The **Ruike M108-TZ** is a stylish and modern pocket knife, for a great price. The design of the M108 might remind you of another Ruike knife: the P108. The same design, only the materials and finish were upgraded. The M108 is a practical pocket knife for daily use. The handle is geometrically shaped and enhanced with a couple tactically placed belleved edges. As a result it feels great in hand.




You quickly open the Ruike M121 with the flipper. Because of the fine ball bearings the blade will shoot from the handle. When opened the blade is locked by a framelock. As such it will never close when you don't want it to. With the secondary lock, on top of the framelock, you can secure it even better. Very safe!



The show side contains only two screws. The pivot is 'blind'. You don't see a cut-out for a screw bit. Nice and clean. At the end of the handle you will find a torx screw that ensures the backspacer stays in place. To secure the backspacer with only one visible screw Ruike added another invisible pin. Not the easiest way to produce a knife, but it looks the best.



The blade is made from 154CM steel. This is a premium type of steel that was originally developed for the aviation and aerospace industry. Good to know: 154CM retains its sharpness well, but is also easy to sharpen. The handle is made from titanium. This is a light-weight, rock-solid material. Because of the matte finish the handle feels great in hand.




Ruike M108-TZ pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

videos

valueForMoneyStars

meetsExpectationsStars

authorCity

Excellent couteau, très bons matériaux, fonctionnement impeccable, solide et fiable avec le cran de sécurité supplémentaire, taille parfaite pour un EDC ni trop grand ni trop lourd.
Rapport qualité/prix imbattable : 65 € pour du 154CM et du titane c'est inespéré.
Merci K&T


Ik had de P108 al en had al vaker naar de M108 gekeken en nu was hij in de aanbieding van 125 voor 65 euro, geen geld voor een mes met 154cm staal en een titanium handvat, verder sluit hij ook mooi, mooi design.

orderNumber

reaction

reviewDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Ruike M108-TZ pocket knife

Ruike M108-TZ pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Ruike M108-TZ pocket knife

Ruike M108-TZ pocket knife

Ruike M108-TZ pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Ruike M108-TZ pocket knife

Relevant topics