Name: Southern Grind Bad Monkey OD-Green, Tanto, PVD-black
Brand: Southern Grind
SKU: SDSG03050203
Availability: BackOrder

Handle/blade: G10/Sandvik 14C28N
Blade length: 10,0 cm
Weight: 155 gram


The **Southern Grind Bad Monkey** is a large and solid pocket knife. When you hold a Bad Monkey, you immediately feel how well the ergonomics are though out. The finger groove is in exactly the right place, as is the jimping (grip) on the back of the blade. For heavier tasks you will still have solid grip. The blade length of 10.4 cm really begs for you to use this knife for heavy duty!


The blade is made of Sandvik 14C28N-steel. A stainless steel type which is delivered sharp as a razor and easy to keep that way. The finish looks luxurious with a stonewashed part and a part satined. Both sides of the blade have a thumb stud and opening it with one hand goes smoothly. 



The Modified Tanto blade shape is very special. On the tip it actually has a little more edge, which makes the tip even stronger than a regular tanto. Next to that, it also looks awesome!


The grip parts are made of G10 which have small ridges machined on them. It not only provides extra grip but also looks stunningly beautiful. Between the grip parts there are titanium liners which make it sturdy, stainless and lightweight. The liners also hold the liner-lock and keeps the blade firmly in place in opened position. Characteristic of Southern Grind knives is the early lock-up. This means that any wear and tear has no influence on the workings of the lock.



Another Southern Grind characteristic is the pocket clip. They use a short but wide pocket clip. Unconventional, but very functional. The knife falls discretely inside your pocket. It also doesn’t damage your pocket as much as a different pocket clip would. 




The Southern Grind Bad Monkey is a real fresh breeze in the world of pocket knives. The excellent finish, fine ergonomics and good materials are really appealing. An excellent example of an American manufacturer pushing the boundaries! 





Southern Grind Bad Monkey OD-Green, Tanto, PVD-black

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

videos

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Southern Grind Bad Monkey OD-Green, Tanto, PVD-black