Name: Spyderco Street Bowie Black FB04PBB Black FRN Kraton, fixed knife, Fred Perrin design
Brand: Spyderco
SKU: SPFB04PBB
Price: 156.45 EUR
Availability: InStock

The **Spyderco Street Bowie Black FB04PBB** is a small, fixed knife designed by Fred Perrin. A former French Army Commando, national Tae Kwon Do-champion and European full-contact stick-fighting champion. In addition, he is one of Europe's most sought-after close-combat and self-defence instructors. The design of his knives gives away that his specialty lies in close-combat.

## Spyderco Street Bowie blade

As the name suggests, the blade has a Bowie-style shape. This blade shape is especially great for piercing tasks. The blade is made from VG10 steel, a remarkable type of stainless steel. It's a tried-and-tested steel type with excellent sharpness retention. The blade has a black, scratch-resistant and non-reflective ceramic coating for a tough yet subtle look.

## Spyderco Street Bowie handle

The handle is made from Fibreglass Reinforced Nylon (FRN) and is poured directly on the tang of the knife. FRN is a fibreglass-reinforced plastic. What's great about FRN is that it can take a beating, and it is water-resistant. The handle is long, so it will be comfortable to hold even when you're wearing gloves. Thanks to the indentation for your index finger and the 'jimping' (notches on top of your knife) for the thumb, you have a great grip and great control over your knife. The Kraton inlay (a rubber-like material) provides extra grip. 

## Spyderco Street Bowie sheath

The Street Bowie was designed to be worn on your belt or other equipment. A custom-made polymer sheath and Spyderco's famous G-Clip belt clip are included.

Spyderco Street Bowie Black FB04PBB Black FRN Kraton, fixed knife, Fred Perrin design

brand

colour

handedness

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

legal_agecheck_key

notforsale

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

not_replaced_in

expectedRestockDate

videos

zm_series

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

value_max_belt_width

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Spyderco Street Bowie Black FB04PBB Black FRN Kraton, fixed knife, Fred Perrin design