Name: Steel Will Intrigue F45M-14 Grey FRN pocket knife
Brand: Steel Will
SKU: SWK-F45M-14
Price: 44.99 EUR
Availability: OutOfStock
Rating: 8 (1 reviews)

Knives and Tools Knife Cleaning Mat, rubber

notforsale

not_replaced_in

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools #OneKnifeStand, knife stand

Handle/blade: FRN/D2
Blade length: 8.2 cm
Weight: 85 grams

Steel Will Intrigue F45M-14 Grey FRN pocket knife

blade_finish

Steel Will Intrigue F45M-15 Blackwashed Grey FRN pocket knife

colour

handedness

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

expectedRestockDate

legal_agecheck_key

msrp_price

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Na goede ervaringen met de Cutjack, ook de Intrigue aangeschaft. 
Mooi slank mesje met ingetogen uiterlijk, dus goed bruikbaar op kantoor of restaurant. Prima om biefstuk of fruit mee te snijden en verpakkingen mee te openen. Het FRN oogt iets minder plastic dan op de foto, maar G10 vind ik vaak net iets mooier. De blauwe (geanodiseerde?) stand-offs zijn mooi. Komt redelijk scherp uit de doos. D2 is prettig staal in deze prijsklasse. Het blijft vrij lang scherp en is makkelijk te slijpen op mijn Spyderco Sharpmaker. Lock-up van de linerlock is 40 procent. De flipperactie is erg fijn, zeker na een druppeltje olie. Goede jimping aan het begin van het lemmet en op de flipper. Fijn, dan zie je wel eens anders. 
Enige nadeel is de pocketclip, die helaas niet deep-carry is. Vervelender is het feit dat de clip met erg veel kracht op het relief van het heft drukt. Het uit je zak trekken kan dan een broek (vooral pantalon) beschadigen. Je kunt dit oplossen door dat deel van het heft glad te schuren. 
Al met al een mooi vormgegeven mes met een erg fijne flipper-aktie en een zeer goede prijs/kwaliteit verhouding.    
Uiteraard zeer snel geleverd door K&T.

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Steel Will Intrigue F45M-14 Grey FRN pocket knife

Steel Will Intrigue F45M-14 Grey FRN pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Steel Will Intrigue F45M-14 Grey FRN pocket knife

Steel Will Intrigue F45M-14 Grey FRN pocket knife

Steel Will Intrigue F45M-14 Grey FRN pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Steel Will Intrigue F45M-14 Grey FRN pocket knife

Relevant topics