Name: Steel Will Nutcracker F24-33 Grey, pocket knife
Brand: Steel Will
SKU: SWK-F24-33
Availability: OutOfStock

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

productlabel

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1166H, camo green, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Handle/blade: G10/N690
Blade length: 8.6 cm 
Weight: 130 grams

The **Steel Will Nutcracker F24** is a solid pocket knife, made to open nuts. That is why its blade is 4.0 mm thick! Quite a lot of an EDC pocket knife. At the same time it is a lot more versatile than simply opening nuts. You can also use it for common EDC use. Think of opening boxes, packaging or cutting cardboard into pieces. But also in the kitchen the Nutcracker will come in handy. The shape of the blade might remind you of a Japanese santoku: a versatile kitchen knife.



You quickly open the Nutcracker with the slipper. A solid Linerlock ensures that your fingers are safe. As such you can confidently get to work. The handle is made from solid G10. Great because it offers you enough grip. The blade is made from Böhler N690 steel. A tough, fine type of steel that retains its sharpness well and is also easy to sharpen. A great combination for this pocket knife.




Steel Will Nutcracker F24-33 Grey, pocket knife

colour

Steel Will Nutcracker F24-10 Black, pocket knife

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Steel Will Nutcracker F24-33 Grey, pocket knife

Steel Will Nutcracker F24-33 Grey, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Steel Will Nutcracker F24-33 Grey, pocket knife

Steel Will Nutcracker F24-33 Grey, pocket knife

Steel Will Nutcracker F24-33 Grey, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Steel Will Nutcracker F24-33 Grey, pocket knife

Relevant topics