Name: Viper Belone Blue Titanium 5970BLTI pocket knife, Jesper Voxnaes design
Brand: Viper
SKU: VPV5970BLTI
Price: 219.2 EUR
Availability: InStock
Rating: 9 (1 reviews)

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools Knife Pouch Wolf Grey, by Maxpedition

Skerper Maintenance Oil Pen MA002, 10 ml

Schmuckatelli Joe Skull Bead 3/16" Hole Pewter

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

Fallkniven Diamond Ceramic Whetstone DC4

TSPROF Blitz Complete sharpening system

Spyderco Sharpmaker, 204MF

Handle/blade: titanium/M390
Blade length: 8.7 cm
Weight: 90 grams

The **Viper Belone** is a practical and fancy EDC pocket knife, designed by Jesper Voxnaes. For this design he became inspired by the classic knives that were used in the south of Europe by fishermen. They never left home without a pocket knife. Keeping that thought in mind Voxnaes designed this pocket knife.

 Striking about the Viper Belone is the classic shape of the blade. It might remind you of the ancient Pattada and Navaja knives that were used in Italy and Spain. You quickly open the knife with the subtle flipper. When closed you will hardly notice the flipper, but it is easy to use because of the grip serrations. Once opened the flipper completely disappears.

 The blade is made from Böhler M390. An Austrian type of super steel that retains its sharpness for a very long time. In addition M390 is very corrosion resistant. The perfect choice for daily use and one of the most popular types of steel on the market.

 The handle is made from titanium. On the inside chambers are milled out so the weight of only 90 grams is pleasantly low. In addition, because of its slim profile you will hardly notice it in your pocket. Because of the subtle deep-carry pocket clip it will really disappear in your pocket.

 The Italian type and finish from Viper definitely finish this design. The spine of the blade and the backspacer are neatly rounded and the contrasting finishes of the materials completely finish the Belone.



Viper Belone Blue Titanium 5970BLTI pocket knife, Jesper Voxnaes design

colour

Viper Belone Bronze Titanium 5970BRTI pocket knife, Jesper Voxnaes design

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

Viper Belone Titanium 5970TITI pocket knife, Jesper Voxnaes design

brand

zm_series

expectedRestockDate

legal_agecheck_key

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Magnifique couteau, autant le manche en titane que la superbe lame.
le bruit à l'ouverture inspire la qualité. Le tranchant est redoutable.
Le couteau est léger et se porte agréablement dans la poche avec son clip très discret. En un mot, superbe.

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Viper Belone Blue Titanium 5970BLTI pocket knife, Jesper Voxnaes design

Viper Belone Blue Titanium 5970BLTI pocket knife, Jesper Voxnaes design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Viper Belone Blue Titanium 5970BLTI pocket knife, Jesper Voxnaes design

Viper Belone Blue Titanium 5970BLTI pocket knife, Jesper Voxnaes design

Viper Belone Blue Titanium 5970BLTI pocket knife, Jesper Voxnaes design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Viper Belone Blue Titanium 5970BLTI pocket knife, Jesper Voxnaes design

Relevant topics