Name: WE Knife 911A Malice pocket knife, Ferrum Forge Knives design
Brand: WE Knife
SKU: WK911A
Price: 363.45 EUR
Availability: BackOrder
Rating: 10 (1 reviews)

Work Sharp Professional Precision Adjust Elite Knife Sharpener WSBCHPAJ-PRO-ELT, sharpening system

notforsale

productlabel

not_replaced_in

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

WE Knife Baculus, TP-07B tactical pen

legal_agecheck_key

Skerper Paddle Strop STP001, stropping paddle

WE Knife Baculus, TP-07A tactical pen

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper paddle strop Viking, rough, stropping paddle

Spyderco Sharpmaker, 204MF

Civivi C20048-2 Key Bit Container Bronze Titanium

Civivi C20048-3 Key Bit Container Blue Titanium

Civivi C20048-1 Key Bit Container Grey Titanium

Knives and Tools Knife Cleaning Mat, rubber

WE Knife Syrinx TP-04B EDC pen, Grey

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

Handle/blade: titanium/M390
Blade length: 9 cm
Weight: 175 grams

The **WE Knife Malice 911A** is a remarkable pocket knife, designed by Elliot and Chris Williamson from Ferrum Forge Knives. They are two brothers who started their own knife brand a couple of years ago. Completely focused on robust top-quality pocket knives with the most remarkable finishes, The WE Knife Malice is clearly different from most Ferrum Forge knives. There are, however, some familiar characterizing design elements. The milled part in the blade and the robust simplistic construction are a great example.

 WE Knife used Böhler M390 steel for the blade. With the Böhler M390 WE Knife clearly emphasizes that this knife is made to be used. This Austrian super steel retains its sharpness well and is not prone to rust. As mentioned before the blade has a beautiful milled groove. This is not only decoratively speaking very nice, it can also be used to open the knife. Not really your thing? No problem. The Malice can also easily be opened with the flipper. The titanium handle is very solid and has subtle curves. As a result the handle nicely fills the palm of your hand and you will never be bothered by sharp edges that will hurt your hand during use.

WE Knife 911A Malice pocket knife, Ferrum Forge Knives design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

zm_series

msrp_price

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

A pocket knife I would carry every day. Excellent materials, workmanship, pleasing design

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife 911A Malice pocket knife, Ferrum Forge Knives design

WE Knife 911A Malice pocket knife, Ferrum Forge Knives design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife 911A Malice pocket knife, Ferrum Forge Knives design

WE Knife 911A Malice pocket knife, Ferrum Forge Knives design

WE Knife 911A Malice pocket knife, Ferrum Forge Knives design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife 911A Malice pocket knife, Ferrum Forge Knives design

Relevant topics