Name: WE Knife Deacon 901C pocket knife, gold
Brand: WE Knife
SKU: WK901C
Price: 328.75 EUR
Availability: BackOrder
Rating: 10 (1 reviews)

Skerper Maintenance Oil Pen MA002, 10 ml

notforsale

not_replaced_in

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools Knife Pouch Black, by Maxpedition

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Fenix E18R V2.0 rechargeable LED flashlight

productlabel

WE Knife Knife Pouch A-04, leather

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

WE Knife Gesila A-08A Black, titanium pry bar

WE Knife Gesila A-08B Grey, titanium pry bar

Work Sharp Angle Set knife sharpener, WSBCHAGS

Nano-Oil 10w maintenance oil 8cc/8ml

TSPROF Blitz Complete sharpening system

WE Knife Syrinx TP-04B EDC pen, Grey

Lansky Masters Edge Sharpener, MEDGE1

Handle/blade: titanium/M390
Blade length: 8.4 cm
Weight: 78 grams

The **WE Knife Deacon** is a compact gentleman's knife. Compared to most WE Knife knives the Deacon is relatively speaking one of the smallest in our range. Is that a bad thing? Absolutely not! This makes the Deacon the perfect EDC knife. Because of the slim design you will never notice the Deacon in your pocket until you need it.

 The blade is made from M390 steel. This is an Austrian type of super steel and one of the best high-end choices at the moment. M390 excels when it comes to sharpness retention and corrosion resistance. The Deacon has a droppoint shaped blade that is perfect for everyday use. The sandblasted finish looks very chic and is beautifully applied. WE Knife selected ceramic ball bearings. As such the blade moves smoothly and the knife will open quickly with the flipper mechanism. A noteworthy detail is the rounded top of the blade.

 When we look at the handle it becomes evident why WE Knife is one of the best knife brands on the market today. The handle is comprised of a neat titanium bolster and wonderfully finished carbon fibre. Like the bolster it is rounded to make sure the knife feels comfortable in hand during use. The handle is kept together by a titanium backspacer that is enhanced with ridges for additional grip. The screws have a blue anodized finish and add a little colour to the whole.

 The conclusion? You cannot go wrong with a sleek EDC knife such as the Deacon. It is therefore also remarkable that WE Knife was able to produce this phenomenal knife within this very appealing price category.



WE Knife Deacon 901C pocket knife, gold

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Beau couteau compact, léger mais avec une lame de bonne longueur. La finition est exemplaire, les matériaux de qualité. Un peu cher mais une promo Fête des pères m'a décidé. Aucun regret... 

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife Deacon 901C pocket knife, gold

WE Knife Deacon 901C pocket knife, gold

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife Deacon 901C pocket knife, gold

WE Knife Deacon 901C pocket knife, gold

WE Knife Deacon 901C pocket knife, gold

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife Deacon 901C pocket knife, gold

Relevant topics