Name: WE Knife Scamp 905A pocket knife, satin blade
Brand: WE Knife
SKU: WK905A
Price: 231.73 EUR
Availability: BackOrder

Handle/blade: titanium/S35VN
Blade length: 7.5 cm
Weight: 53 grams

The **WE Knife Scamp** is a fancy and modern gentleman's knife. This is the second slipjoint WE Knife has introduced in a short amount of time. It normally takes a while before a brand masters a new mechanism. This is not the case with WE Knife. The Scamp is phenomenally executed.

 With a blade length of 7.1 cm the WE Knife Scamp is a little smaller than its predecessor, the Gentry. The Gentry namely has a blade length of 8.7 cm. As such the Scamp is perfect for anyone who prefers a smaller knife. The handle, however, is what distinguishes the Scamp from the Gentry. It has an interesting almost alien-like wavy pattern with different textures. The titanium has an interesting finish where WE first applied a black coating after which it gave the titanium a light satin finish. The result is a remarkable set of finishes you keep looking at.

 WE Knife used S35VN steel for the Scamp. A great type of steel that retains its sharpness well. The Scamp can easy be opened with the nail-nick and has, like many classic slipjoints, a half-stop. This means that the blade stops halfway after opening. A type of threshold that functions as an additional safety measure. As a result the knife won't accidentally close when you use it. Because the Scamp has a slipjoint mechanism you can legally carry it with you almost anywhere.

 The WE Knife Scamp is a perfect pocket knife for the modern gentleman.

WE Knife Scamp 905A pocket knife, satin blade

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

msrp_price

when spending at least €29.95 on We Knife, Civivi or Sencut knives (one per order)

Free WE Knife knife roll worth €11.50

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife Scamp 905A pocket knife, satin blade

Free WE Knife knife roll worth €11.50