Name: WE Knife Slipstream WK714A pocket knife, grey, stonewashed blade
Brand: WE Knife
SKU: WK714A
Price: 314.05 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

WE Knife Baculus, TP-07B tactical pen

legal_agecheck_key

WE Knife Baculus, TP-07A tactical pen

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

Civivi C20048-1 Key Bit Container Grey Titanium

Civivi C20048-3 Key Bit Container Blue Titanium

Civivi C20048-2 Key Bit Container Bronze Titanium

WE Knife Syrinx TP-04C EDC pen, Black

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools 550 paracord type III, colour: acu, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Handle/blade: titanium/CPM S35VN
Blade length: 9.5 cm
Weight: 130 grams


The **WE Knife Slipstream** is a slim and tough pocket knife with a unique blade. Designer Simon Crafts definitely outdid himself with this design. We rarely come across a knife with such a unique design that still looks modest.


The blade is made from CPM S35VN steel. A stainless powdered type of steel that is made in the United States. The contours of the blade are amazing, but it gets interesting when you look at the grind. The pointed droppoint shaped blade has namely been enhanced with a *compound grind*. This means that one side of the blade is thinner than the other: around the tip it has a flat grind, towards the handle you will find a hollow grind. As such you can use another part of the blade for different cutting tasks. The hollow grind for *slicing*, the (stronger) part for tasks that require more strength.


Not only for the grind WE shows two techniques. The blade even has a *two-tone* finish. You open it with the flipper. Also a feature that is slightly different from what you might have seen before. Crafts has turned the flipper a quarter of a turn. As a result you change the way in which you transfer the momentum on the blade with your finger. To generate enough traction he has placed a sleek jimping on the flipper. The result is a flipper that rarely stands out and functions really well. It might make you wonder why not many other manufacturers design the same type of flipper.


The WK714 Slipstream has been enhanced with ceramic ball bearings. Both around the pivot and in front of the detent ball. The titanium framelock is enriched with a steel insert. This prevents the lock from overstretching and wear and tear in the long run. As such the WE Knife 714 is guaranteed to have a long life.

WE Knife Slipstream WK714A pocket knife, grey, stonewashed blade

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife Slipstream WK714A pocket knife, grey, stonewashed blade

WE Knife Slipstream WK714A pocket knife, grey, stonewashed blade

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife Slipstream WK714A pocket knife, grey, stonewashed blade

WE Knife Slipstream WK714A pocket knife, grey, stonewashed blade

WE Knife Slipstream WK714A pocket knife, grey, stonewashed blade

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife Slipstream WK714A pocket knife, grey, stonewashed blade

Relevant topics