Name: Benchmade 535-1901 BUGOUT
Brand: Benchmade
SKU: BE535-1901
Availability: OutOfStock

Victorinox Huntsman 1.3713 Red, Swiss Army Knife

productlabel

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Marttiini Tundra 352010 CB Natural Curly Birch, outdoor knife

BeaverCraft BSH7 Wild Harvest Bushcraft Knife With Sheath

Daily Customs 91.3 Honeycomb 3D BS Pattern, Titanium P10012433 Victorinox scales

Flytanium Arcade Shark-Lock 1252 Black DLC, Void Black Aluminum, Ultem Inlay, pocket knife

BeaverCraft Bushcraft Knife BSH1, bushcraft knife

BeaverCraft Bushcraft Knife BSH2, bushcraft knife

Marttiini Tundra 352015 GR Dark Curly Birch, outdoor knife

WESN Bornas SN23-8 Elmax, Curly Birch, fixed knife

Lex Custom Victorinox 91 mm Scales V91LH338 Lizard Charcoal Green Titanium, handle scales

Benchmade Dacian 203 Stonewashed CPM MagnaCut, Blue Denim Micarta fixed knife

Flytanium Arcade Shark-Lock 1255 Stonewashed, Gunmetal Grey Aluminum, Green Canvas Micarta Inlay, pocket knife

Daily Customs 91.3 Honeycomb 3D BS Pattern, Rusty Titanium P10012444 Victorinox scales

Benchmade 940 Osborne

Eden Binoculars HD 10x42

Leatherman Wave Plus multi-tool, nylon sheath

Lansky BladeMedic

Nisaku Hori Hori garden knife TM-650

Silky Bigboy 2000 Outback Edition, 360-6.5

Victorinox Swisstool MXBS, 3.0326.M3N, black, nylon, multi-tool

strike_price

Handle/blade: G10/CPM 20CV
Blade length: 8.2 cm
Weight; 60 grams

The **Benchmade Bugout 535-1901** is a light-weight pocket knife, of which only 2000 pieces were produced. Remarkable about this edition is that the handle is made from natural jade G10. The inside is enhanced with a blue Benchmade logo. You can see it through the handle.

 The blade is made from CPM 20CV steel and has a very thin grind. Perfect when peeling an apple. CPM 20CV is corrosion resistant and retains its sharpness well.

 The Benchmade 535 Bugout is enhanced with a slightly shorter deep-carry pocket clip. Less steel means less weight: another detail Benchmade carefully thought about. You can, of course, place the clip on both sides to make sure it is suited for both left and right-handed use.

 Only 2000 pieces of this limited edition knife were produced. While stocks last.



Benchmade 535-1901 BUGOUT

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade 535-1901 BUGOUT

Benchmade 535-1901 BUGOUT

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 535-1901 BUGOUT

Benchmade 535-1901 BUGOUT

Benchmade 535-1901 BUGOUT

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 535-1901 BUGOUT

Relevant topics