Name: Gerber Flatiron Grey & Gear Rag Hank 1052476 blister
Brand: Gerber
SKU: GE1052476
Availability: OutOfStock
Rating: 9 (2 reviews)

Handle/blade: G10 and stainless steel/7Cr17MoV
Blade length: 9.2 cm
Weight: 157 grams

The **Gerber Flatiron Grey & Gear Rag Hank 1052476** is a cool set for EDC or to give as a gift. This combi-pack comes with a cool Gear Rag Hank. Great for EDC or to display your knives on.


The Gerber Flatiron is a solid pocket knife with a cleaver-style blade. This a blade shape you often see with butcher's knives. Because of the straight edge this type of shape is perfect for use in the kitchen.



The blade has a rough stonewashed finish and is made from 7Cr17MoV-steel. A decent and easy to sharpen type of steel. The Gerber Flatiron is easy to open with the elongated thumb hole. The finger groove at the start of the blade gives you a lot of control and ensures that your index finger doesn't accidentally slide forward as you use the knife. Better safe than sorry!



The handle is made from stainless steel and aluminium. When opened the blade is locked with a robust framelock mechanism. An interesting detail is the enormous overtravel stop. As such you make sure you don't push the lockbar too far outside of the frame as you unlock the knife. The overtravel stop is larger than average and enhanced with a subtle elevation. As such your fingers rest on the overtravel-stop, and not on the lockbar. This makes opening the Flatiron a lot easier. The wide, square pocket clip is also very unique and ensures that you can comfortably carry the knife on your pocket.



Again Gerber demonstrates that they can produce amazing knives within this very appealing budget-segment. The Gerber Flatiron is a strong knife that is meant to be used!




Gerber Flatiron Grey & Gear Rag Hank 1052476 blister

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Great little knife, probably going to use it for bbq's garden round the house etc ...not really an EDC but for the fun factor its worth every penny. A cool mini cleaver. The clip was sadly a little loose when i got it and soon realised that the torq's screw heads were threaded, so i could not tighten them, had to use some contact glue to fix it, but for that price iam not gonna complain. All in all, i love it, a typically odd Gerber...worth the money

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Gerber Flatiron Grey & Gear Rag Hank 1052476 blister