Name: Medford Micro Praetorian T, Blue Titanium, Vulcan Finish, Flamed HW & Clip
Brand: Medford
SKU: MFMK08DVD-02AN
Availability: BackOrder

Handle/blade: titanium/D2
Blade length: 7.2 cm
Weight: 140 grams


The **Medford Micro Praetorian** is the smaller edition of Medford Knives’ most famous knife. Stubby, robust and incredibly solid: the Micro Praetorian is it all! 100% made in the USA, with American materials, in a company owned by an American veteran.


The Medford Micro Praetorian might look small as a ‘micro’, it is still pretty big. The blade made from D2 steel has a hollow grind that has been applied by hand. This is a unique feature: there are practically no manufacturers who apply a hollow grind by hand. You can use the royal thumb groove to easily open the knife. It might, however, require some practice at first. When opened the solid frame lock firmly keeps the blade in place. Medford has pushed the stop-pin inside the blade. As such it symmetrically falls against the handle making it additionally solid.


D2 is a type of tool steel that needs maintenance and oil. Some budget knives use D2 as a cheap option by using a rudimentary heat treatment. Medford, however, used D2 to its full extent and turned it into a top-quality type of steel with excellent qualities. So, definitely not a budget option!


This Medford edition has been enhanced with a blue anodized titanium handle. The hardware (screws and pocket clip) have been given a unique pattern with the help of a torch. At the end of the handle you will find a glass breaker. The blade has been enhanced with a Vulcan finish, which is the state a knife is in after the heat treatment, before the grind cleans it.


Each Medford knife is made by hand by talented knife makers. As such each knife has individual differences, making them unique. It takes approximately a year for Medford to ship their knives. Knives that are available on our website are in stock and can immediately be shipped. However, be in time: it might take a while for the new stock to arrive!



Medford Micro Praetorian T, Blue Titanium, Vulcan Finish, Flamed HW & Clip

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

videos

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Medford Micro Praetorian T, Blue Titanium, Vulcan Finish, Flamed HW & Clip