Name: Spyderco C229CFP Shaman, Carbon, SPRINT RUN 19
Brand: Spyderco
SKU: SPC229CFP
Availability: OutOfStock

Handle/blade: carbon fibre/S90V
Blade length: 9.2 cm
Weight: 140 grams

The **Spyderco Shaman C229CFP Sprint Run** is a large and cool pocket knife, designed by Spyderco founder Sal Glesser. The Shaman has different characteristics you might be familiar with from other Spyderco's. At the same time the Shaman is really different within the range.

 This version of the Shaman is very special. This is namely a Sprint Run edition with S90V steel and a carbon fibre handle. Quite the upgrade from the S30V steel blade and the G10 handle.

 We start with what we know: a blade with thumb hole, made from premium S90V-steel with a satin finish. The blade is locked by a solid compression lock. A lock that was invented by Sal Glesser. Steel liners that were enhanced with holes to keep the weight low with carbon fibre scales around it.

 And these carbon fibre scales are exactly what give the Shaman its character. They are nicely rounded and enhanced with a matt finish. They are large, have enough room for very large hands and are very ergonomic.

 As such the Shaman definitely acquired its own place within the Spyderco range. A fascinating design that can be used as a real work knife, but, because of its interesting construction, ergonomics and lock, also makes the hearts of knife collectors skip a beat.

 **Please note: this is a Sprint Run edition. Once sold out we cannot guarantee that new stock will arrive! So be quick!**



Spyderco C229CFP Shaman, Carbon, SPRINT RUN 19

brand

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Spyderco C229CFP Shaman, Carbon, SPRINT RUN 19