Name: Spyderco Stretch 2 XL Salt H-2 C258SYL Yellow FRN, serrated pocket knife
Brand: Spyderco
SKU: SPC258SYL
Price: 167.95 EUR
Availability: InStock

The **Spyderco Stretch 2 XL Salt H-2 C258SYL** is part of Spyderco's well-known Salt series. A knife series made specifically for maritime purposes. Every single part, from the blade to the screws, is corrosion resistant.

The Spyderco Stretch 2 XL is a larger version of the well-known Stretch 2. The difference between these two knives is that they slightly stretched the design of the Stretch, no pun intended! The blade is about 1 cm longer, and the knife is 2 cm longer in open position. This makes the Stretch 2 XL more suitable for people who prefer a larger knife.

## H-2 steel

You can easily open the pocket knife one-handed with the thumb hole. When opened, the blade is locked by a solid back lock. The knife is equipped with a Boye dent to make sure you don't unlock it accidentally. This Boye dent is a small cutout that prevents you from accidentally releasing the lock. The blade is corrosion resistant. That is because it is made of H-2 steel, an improved version of Spyderco's H-1 steel. This is a type of steel in which all carbon is replaced by nitrogen. The result is a guaranteed stainless type of knife steel that retains its sharpness well.

This version of the Stretch 2 XL Salt is enhanced with a serrated edge. This edge turns cutting through high-fibre materials such as rope into a piece of cake.

## FRN handle

The handle is made from FRN, Like many other knives in the Lightweight series. FRN is a lightweight plastic reinforced with fibreglass. The Stretch 2 XL doesn't have steel liners. The knife weighs only 82 grams.

The pocket clip can be mounted in four different ways; tip-up, tip-down and for left-handed users or right-handed users.

Spyderco Stretch 2 XL Salt H-2 C258SYL Yellow FRN, serrated pocket knife

knife_edge_type

Spyderco Stretch 2 XL Salt H-2 C258PYL Yellow FRN, pocket knife

colour

handedness

blade_finish

opening_system

handle_material

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

legal_agecheck_key

notforsale

not_replaced_in

expectedRestockDate

videos

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Spyderco Stretch 2 XL Salt H-2 C258SYL Yellow FRN, serrated pocket knife