Name: Zero Tolerance 0055BLK Sprint Run pocket knife, GTC-design
Brand: Zero Tolerance
SKU: ZT0055BLK
Price: 299.95 EUR
Availability: BackOrder

Knivesandtools #EveryDayCloth, micro-fibre cloth

notforsale

not_replaced_in

Knivesandtools Knife Pouch Wolf Grey, by Maxpedition

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools KT Patch

Skerper Basic sharpening pen with a diamond steel, SO001

Knivesandtools Knife Pouches, set of 4, by Maxpedition

Knivesandtools #OneKnifeStand, knife stand

Fenix E18R V2.0 rechargeable LED flashlight

productlabel

Lansky Masters Edge Sharpener, MEDGE1

Zero Tolerance lanyard gray/blue

Nano-Oil 10w maintenance oil 8cc/8ml

Work Sharp Angle Set knife sharpener, WSBCHAGS

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

TSPROF Blitz 360 Complete sharpening system

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Schmuckatelli Spartan Skull Bead Pewter

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Schmuckatelli Rose Skull Bead 2-Tone Antique Rhodium/A.Gold

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Schmuckatelli Kiko Tiki Bead Hematite

Schmuckatelli Classic Skull Bead Black Oxidized

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Zero Tolerance knife storage bag - ZT997

Handle/blade: titanium/CPM 20CV
Blade length: 9.5 cm
Weight: 140 grams

The **Zero Tolerance 0055BLK** is a remarkable pocket knife, designed by Gustavo Cecchini of GTC-design. Not only does this pocket knife look amazing, it has also been enhanced with a remarkable openings mechanism. After all, you can open it with a flipper. Nothing new, you could say. However, the flipper on the 0055BLK is slightly different. After all, it folds away with a spring when the knife is opened. When closed a spring will also keep the flipper out of sight. First you pull the flipper out a bit, through the tension of the spring, after which it will work like a regular flipper. Cecchini called it the SLT-system.

 This version of the 0055 is a special *Sprint Run*. The handle has a black coating and is enhanced with a geometric pattern. In addition, the steel was changed to CPM 20CV for even better performances. Only a limited amount of this version are produced. While stocks last.

 It makes the knife look a little like a type of *Transformer*. The blade is made from CPM 20CV-steel. A powder metallurgical steel that is incredibly stainless and retains its sharpness well. Cecchini designed the blade with a compound grind. This means that the back half of the blade is thicker than the front half. As such you use the back half for things that require more force and the front part for the detailed jobs.

 The handle is milled out of titanium. Here you can also find the characteristic geometric Cecchini lines. Even the pivot has been adorned with a nice finish. Even though it has a lot of straight lines and sharp angles it still feels great in hand. Facets and grip ridges were placed in just the right places. A well thought-out design.



Zero Tolerance 0055BLK Sprint Run pocket knife, GTC-design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Zero Tolerance 0055BLK Sprint Run pocket knife, GTC-design

Zero Tolerance 0055BLK Sprint Run pocket knife, GTC-design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Zero Tolerance 0055BLK Sprint Run pocket knife, GTC-design

Zero Tolerance 0055BLK Sprint Run pocket knife, GTC-design

Zero Tolerance 0055BLK Sprint Run pocket knife, GTC-design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Zero Tolerance 0055BLK Sprint Run pocket knife, GTC-design

Relevant topics